Yamaha TTR125 VM24 Carburetor Kit - Replacing Later Twin Cable Carb

Description: Mikuni Oz Product Description Please thoroughly read the product description to understand the two option differences. Please note: This kit does not come jetted. There are also two variations of this kit and are both listed. The description for both is the same to describe the differences. This VM24 carb is good to go out of the box on pre 2006 Yamaha TTR125 models with just a couple of spare main jets for checking wide open throttle tune, but requires extra mains and pilot jet on the later models where the motor was changed for emissions compliance changes back then. The main and pilot circuit differences between the two motor versions is huge and if fitting the wrong option you will instantly know its not right, then requiring the other jetting option. 2006-2008 year bikes can swing either way where if unsure please contact the office as jets are non-returnable items. The alternate jets can then be purchased separately later through the Tuner kits option off the VM24 carb page found in the main menu “VM Roundslide Carbs” drop list. CABLE ATTACHMENT: If you have the early version OEM carb with the cable in through the top like our VM24, this is an easy swap by removing the new carbs top adjuster and drilling out the carb top to match yours, then fitting your OEM cable directly in place. Otherwise if your carb has the twin cable side attachment as in the picture, you then only use your pull cable. To make this work you cut the lower fitting off the inner wire and remove it. Remove the lower metal fitting off the outer cable and redirect it into the top of the new carb brass adjuster. Using the supplied new inner wire, fit the ball end to your throttle, calculate a safety margin into the wire length for slide attachment and then solder on the supplied end nipple. We have a video on soldering in the main menu “How To Videos” option at the top of the main menu. Use the rubber boot of your original cables to fit over the carb top adjuster. KIT replacing early carb with single cable: Kit includes VM24 Carb, two spare main jets. KIT replacing later carb with twin cables: Kit includes VM24 carb, 1x inner cable wire, 1x 3×4 nipple, 3x main jets, 1x pilot jet (THIS IS THE KIT YOU ARE PURCHASING) This VM24 Mikuni VM roundslide carburetor is the option of choice for your motor fixing all the OEM carbs short comings with a new found power and performance as a great bonus. All this means getting the full enjoyment out of your Yamaha has never been so easy, say goodbye to sticking choke mechanisms, hard starting, hesitations and flatspots. These Mikuni carburetors are easily fitted to your Yamaha TTR250 and can either be used with a POD or foam filter or can be connected to your OEM air-box. There is what has proven for years to be the correct jetting supplied, as well as spare mains for fine tuning. Climate, altitude and fuel density from different octane fuels all have varying effects on final fine tuning as does cam, exhaust and cylinder head porting etc. For this reason, we have included what we have found to be a range of jets to allow you to tune to most variables. There’s a VM carb tuning video also at the top of the menu. Additional Information:Please Note: Other than exact replacement OEM carburetors, all Mikuni Aftermarket Carburetors and Tuning Components are sold “As Is” for Off Road / Racing Use Only and are not intended or approved for use on vehicles operated on Public Roads or in locations where applicable engine tampering and anti-pollution laws apply. Australian Shipping Information:All shipping within Australia is via Australia Post only.Please note that we are located at Townsville North QLD and that all standard shipping “Free Freight” travels by train from us all the way down the East Coast as far as Victoria. EBay freight times are estimates only and do not take in to account our location. We have express options available for all our products also. The freight times around Australia are as follows-Standard or eBay “Free Freight”Townsville to Brisbane 3 days, Townsville to North/Just South and West is usually 1-2 days,NSW ACT & VIC 4-6 days, TAS & SA 4-8 days, WA & NT 8-12 days.Express FreightAnywhere in QLD except some rural areas is next day delivery. NSW ACT & VIC 2 days, TAS & SA 2-3 days, WA & NT 3-4 days.Please note that weather events such as flooding, cyclones and other natural disasters etc will delay any ground freight. This is entirely out of our control if this occurs. International Shipping Information:All international shipping is done through Australia Post Express Courier EMS service.The international service we use is generally 4-5 Business days for delivery but can be shorter or longer. All international buyers are responsible for the payment of their domestic customs duties and taxes charged on imported goods. The duty-free threshold and duty/taxes payable rates differ from one country to another and we strongly advise you check your liability before ordering if unsure. Please check your tracking on all international shipments within 7 days to follow their progress and determine if it is being held by your local customs dept. or on their behalf by the Postal Service, who you will need to contact using the provided tracking number. As per the eBay terms and conditions, WE ARE NOT RESPONSIBLE AS A SELLER FOR YOUR COUNTRIES IMPORT DUTIES OR TAXES, WE HAVE NOT NOR WILL WE EVER PAY YOUR IMPORT DUTIES OR TAXES, OR REFUND ANYONE FOR THEM AND THEY ARE DEFINITELY NOT INCLUDED IN THE ITEM PRICE! PLEASE CHECK YOUR COSTS BEFORE MAKING THE PURCHASE! THIS IS JUST PLAIN OLD COMMON SENSE. Please also note that international parcels HAVE to be signed for and all parcels whether domestic or international are fully insured. Returns and Refunds:Our business Warranty or Return period is 7 days only. We do accept eBay’s 30 day return policy but please read all the information below carefully before making your purchase.THE FOLLOWING INFORMATION IS FINAL.Here at Mikuni OZ we do offer refunds and returns but there are strict procedures for this.All carburettor kits that need to be returned for refund or exchange MUST be returned in the exact same way they left the warehouse. All Carburetors & Carby kits that have been opened WILL BE thoroughly stripped and inspected, in the case of any fuel being added, greases or lubricants, tampering or any form of damage to the carburettor there will be ABSOLUTELY NO refund and the kit will be returned to you at your expense! THIS IS FINAL AND NO OTHER EXCEPTIONS!Absolutely all returns for any reason will be charged a 10% restocking fee whether it has been opened or not before it was returned and the freight for us to send you the kit originally will be deducted also before your refund is issued.

Price: 290 AUD

Location: Townsville, Queensland

End Time: 2025-02-03T02:03:13.000Z

Shipping Cost: 25.33 AUD