XBOX ONE -- System Software Update USB Installer -- OPERATING SYSTEM

Description: USB SIZE: 16GB You can update your console using the Xbox Startup Troubleshooter. To bring up the Xbox Startup Troubleshooter, follow these steps:Power off your console, and then unplug the power cord to ensure that the console is completely powered off.Wait 30 seconds, and then plug the power cord back in.Press and hold the Pair button (located on the left side of the console) and the Eject button (located on the front of the console), and then press the Xbox button  on the console.Note The Xbox Series S and the Xbox One S All-Digital Edition do not have Eject buttons. You can bring up the Xbox Startup Troubleshooter on these consoles by holding only the Pair button (steps 3 & 4) and then pressing the Xbox button . Continue holding the Pair and Eject buttons for 10-15 seconds.Listen for two “power-up” tones a couple of seconds apart. You can release the Pair and Eject buttons after the second power-up tone.The console should power up and take you directly to the Xbox Startup Troubleshooter. Plug the USB flash drive with the Offline System Update files into a USB port on your Xbox console. When the flash drive is inserted, the Offline system update option on the Xbox Startup Troubleshooter becomes active. Use the D-pad and A button  on your controller to select Offline system update to initiate the update using the files saved on your flash drive.Note The console restart may take several minutes. If you were using a wired connection, plug your network cable back into the console. If you have never connected your console to the Internet, you will need to connect at least once during your system setup process.When the update is complete, the console will restart and you should be returned to the Home screen. If this happens, your console is now up to date! You can remove the USB drive from your console.

Price: 9.99 USD

Location: Dearborn Heights, Michigan

End Time: 2024-10-16T23:24:52.000Z

Shipping Cost: 3.99 USD