WS303 Mini Leak Detection Sensor

Description: WS303 Mini Leak Detection Sensor is a tiny and mighty leakage detection sensor for detecting presence of water leaks and transmitting an alarm using LoRaWAN® technology. With this low power consumption technology, WS303 Mini Leak Detection Sensor can work up to 5 years with a 590mAh battery. Compliant with Milesight D2D protocol, it can directly link with other Milesight devices to realize danger prevention and effectively prevent unnecessary loss. The wire-free WS303 can be easily used in smart offices, buildings, and houses. Users can receive real-time alarms via a built-in buzzer locally and a mobile App remotely. Combining with Milesight LoRaWAN® gateway and Milesight IoT Cloud, users can manage all sensor data remotely and visually. Smart Water Leak Detection Solution Introducing WS303, the mini water leak detection sensor That detects the presence of leaks and raises alarms locally and remotely. With low power consumption, it can operate for 5 years on a single battery. It's ideal for smart offices, buildings, houses, etc. Immediate Warning Against Water Damage WS303 will sound an alarm and send a remote alert when water leakage occurs. Sensitivity That Exceeds Expectations The WS303 sensor uses water conductivity to detect a minimum water level of 0.5 mm by forming a circuit with two little metal probes. (Other conductive liquids are also supported.) Milesight D2D Communication Milesight D2D (Device to Device) communication protocol featuring LoRa® enables the communication among different Milesight LoRaWAN® node devices without a LoRaWAN® gateway. Lower Latency Less than 1 Second Response Time Secure Transmission Reduce Investment Cost Power Failure Alarm WS303 includes capacitor storage to trigger a power failure alarm. NFC Configuration Switching On/Off & Configuring the Devices Wirelessly 1st Step Install the Milesight ToolBox 2nd Step Enable NFC and run ToolBox, then attach your phone to the device 3rd Step Verify the password and start configuring Detect the presence of conductive liquids using a small water probe A replaceable built-in 590mAh battery with up to 5 years of life for wire-free power supply IP67 waterproof enclosure for harsh environment applications Embedded with a buzzer for real-time alarming Support Milesight D2D protocol to enable ultra-low latency and direct control without gateways Equipped with NFC for easy configuration Compliant with standard LoRaWAN® gateways and network servers Quick and easy management with Milesight IoT Cloud solution Wireless Transmission Technology LoRaWAN®, Milesight D2D Frequency CN470/IN865/RU864/EU868/US915/AU915/KR920/AS923-1&2&3&4 Tx Power 16dBm(868 MHz)/20dBm(915 MHz)/19dBm(470 MHz) Sensitivity -137dBm @300bps Mode OTAA/ABP Class A Leakage Detection Liquid Type Conductive Liquid Trigger Condition Once Liquid Level Reaches 0.5mm Others Buzzer Support Configuration NFC Configuration via Mobile App Advanced Feature Milesight D2D Controller Physical Characteristics Power Supply 1 × 590mAh CR2450 Lithium Battery Battery Life 5 years (One hour leakage per week, 25°C) Operating Temperature -10°C to +60°C Relative Humidity 0% to 100% (Non-condensing) Ingress Protection IP67 Dimension 63 × 63 × 14 mm Material & Color ABS+PC, White Installation 3M Tape Mounting, Desktop Stop Leaks, Avoid Further Damage Immediate Warning Locally and Remotely Unique Milesight D2D Communication Up to 5 Years Battery Life with One Coin Cell Battery Robust IP67 Waterproof Protection US915 Support

Price: 84 USD

Location: Irvine, California

End Time: 2024-12-29T21:54:00.000Z

Shipping Cost: N/A USD