Wrist Strap Grounding Tester Anti-Static ESD Test Ground Wires Test Device Only

Description: Exact wrist strap tester verifies that resistance of your wrist strap is no lower than 800KΩ and no greater than 9MΩ.The proper resistance will provide an "OK" LED indication on the wrist strap tester. If either the RED "FAIL LOW" or Red "FAIL HIGH" LED's light, and the audible indicator sounds, then the wrist strap (or the ground cord) should be replaced. Requires 9V battery. Battery not included. Unscrew screws on back of unit and insert 9v battery into compartment. Overview: The static strap function, Wrist Strap Tester can quickly and easily check the following: Test static strap and ground wire connection Test the impedance between skin and Static strap Test the connection during anti-static access panels, cushion for connecting ground Quickly and easily check ground systems at any place Avoid static electricity to damage the product Ensure staff safety Specifications: Instruction Impedance calibration: Buzzer Low(red): R Good(green): 800K ohm less R less 9M ohm ON High(red): R>9M ohm OFF Outside size: 80(W)x40(H)x117(D)mm Power source: 9V battery The length of grounding wire: 2.5m Simple and Responsive Push Button Wrist Strap Tester. Wrist strap not included. Use any standard ground wrist strap or wire with bananna plug male end. Provides clear audible and visible fail/pass indications Small size, cordless, portable operation for use in any work area Quickly and easily check ground systems at any place Fabricated in a durable, ESD-safe plastic housing. Operates with 9V battery. Battery not included. Wrist strap not included.

Price: 55.78 USD

Location: Florence, New Jersey

End Time: 2024-12-26T06:58:28.000Z

Shipping Cost: 0 USD