Wireless Thermometer for Stove Pipe, Chimney, With High Temperature Alarm

Description: This is a wireless thermometer with two display units. It can be used to remotely monitor the temperature of a stove pipe, a chimney in a multi-story home or outdoor wood boiler. For stove/chimney, the wireless feature provides you the ability to monitor the stove temperature remotely. You can place the sending unit near the stove in the basement and the monitoring unit upstairs.For outdoor wood boilers, the wireless feature gives you the ability to monitor the boiler's water temperature remotely. You can attach the probe to the boiler water line to monitor the temperature of the water. Both units have the temperature display and alarm buzzer. The wireless unit eliminates the need for a long sensor cable that is difficult to install and less reliable. It also allows you to read the temperature either by the stove/wood boiler, or remotely.One display unit is the remote monitor unit (AT210-B), can monitor temperature reading from one or up to 10 thermometer units (AT210-A). The thermometer unit (AT210-A) should be placed on-site where the stove is located. This unit has a port to take input signal from the temperature probe. There is also a 12VDC output port to power external buzzer (not included). Both of thermometer and remote monitor units have a built-in buzzer. The meter contains two alarm settings for the buzzer. One alarm can be used for high limit alarm and other can be used for low fuel alarm. This gauge is powered by 12V DC through an AC adapter (included) for continuous operation. It can also be powered by car battery. Wireless thermometer (AT210-Combo) with power supply, and a washer sensor.Included in the package: 1 x Remote monitor unit (AT210-B) 1 x Thermometer unit (AT210-A) 2 x AC to 12VDC adapter 1 x type K thermocouple temperature sensor (select appropriate model in the sensor option) Probe: Three probe options are available:1). The washer sensor (TC-K-WS) is suitable for single wall pipes. It can be mounted on the surface of the pipe or stove with a #10 screw. Maximum temperature 1650ºF.2). The 4" (100 mm) probe (TC-K-BR) with mounting bracket can be used on double wall pipes. User needs to drill a 1/8" hole to insert the probe. Maximum temperature 1650ºF.3). The magnet probe (TC-K-MAG) can be attached to iron or steel pipes or walls. If the temperature is beyond this limit, the magnets may lose some of its holding force. Maximum temperature 750ºF. Washer Sensor for Single Wall (TC-K-WS)Sensor with Bracket for Double Wall (TC-K-BR) Magnet Probe for Surface Temperature Such as Cast Iron Stove (TC-K-MAG).Probe Specifications: Washer Sensor (TC-K-WS)Double Wall Sensor (TC-K-BR)Magnetic Sensor (TC-K-MAG)Temperature Range1650ºF (900ºC)1650ºF (900ºC)750ºF (400ºC)Accuracy+/-5ºFCable InsulationFiberglass with stainless steel over braid.Cable Working Temperature900ºFCable Length6 ft (2 m) Display unit can be set to either Celsius or Fahrenheit. Temperature range (With K type thermocouple) : -320 ºF-1650 ºF. (Higher temperature probe is available upon request) Accuracy: +/-5 ºF over the entire range. Click here for instruction manual. *Shipping note for international/non-US customers: The default international shipping method for this listing is FedEx or DHL. Estimate delivery time is about one week. Please provide your physical address and correct contact information for the package delivery (physical address is needed). For customers in remote/rural area, to avoid remote area delivery surcharge, we will ship your order out by USPS instead automatically (US postal service). It will be delivered about 1-2 weeks to Canada, 3-4 weeks to other countries. For special inquiry regarding our international shipping, please contact us.

Price: 164.99 USD

Location: Alpharetta, Georgia

End Time: 2024-01-22T20:39:17.000Z

Shipping Cost: N/A USD