Wireless Electric Soldering Iron Fast 4 Temps Rechargeable Welding Repair Tools

Description: Wireless Electric Soldering Iron Fast 4 Temps Rechargeable Welding Repair Tools Features: *1. Portable: The soldering iron is very small and lightweight, easy to carry and store in the handbag when not in use. *2. USB Rechargeable: The soldering iron supports USB recharging designs, convenient for users to connect with any USB power source. *3. Adjustable: The soldering voltage can be adjusted to control temperatures, meeting various demands and safe to use. *4. Sturdy: The soldering tip adopts stainless steel, which is heat-resistant, rustproof, not easy to break or deform. *5. Quick Heat: The soldering tool features quick-heating design, saving much labor, suitable for professional crafters and home use. Description: *1. Charging voltage: USB-5V *2. Charging interface: Type-C / Micro *3. Battery: 1100mAh *4. Power: 8-15W *5. Temperature range: 200℃-460℃ *6. Heating time: 8-12s *7. Welding tip resistance: 1.3-2.1Ω *8. Size: 14*160mm(soldering iron+tip) *9. Weight: 39g(soldering iron+tip) Instructions: 1. Tighten the welding head (properly), and press the button five times in a row to turn the machine on and off (press it quickly without stopping). You need to hold down the power button all the time to heat the soldering iron. Release the button and it will stop heating. (Press and hold for heating, release to stop heating) 2. If the power key is pressed for more than 60 seconds, the battery will start the sleep function (i.e. stop heating. The light will flash). At this time, just release the button and press it again to restore normal heating. 3. There are four adjustable gears. Press the button three times to switch gears. The red light is high temperature (about 460℃). Blue light is moderate temperature (about 380℃). The green light is low temperature (about 300℃). Press the power key for heating. Release the key to stop working. 4. Press the key twice to switch to the continuous heating function in the power-on state, about 400℃ (this mode works continuously for 5 minutes, so you dont need to press and hold the switch). 5. There are two charging interfaces at the bottom, which is Type-C or micro interface. 6. There is a red indicator light at the bottom in the charging state, which shows green or goes out when it is full (Note: PD or QC fast charging is not supported). 7. When not in use for a long time, the battery should be fully charged. Package Includes: 1x Soldering Iron 1x Cap 1x USB Cable 1x Soldering Iron Stand 1x Soldering Wire 1/3x Soldering Iron Tips On Aug 5, 2022 at 06:37:15 PDT, seller added the following information:

Price: 20.29 USD

Location: Xiamen

End Time: 2025-02-05T14:32:04.000Z

Shipping Cost: N/A USD