White Industries 175 mm BLACK A30 MOUNTAIN Cranks with spindle

Description: ASK US ABOUT MULTIPLE COMPONENT STORE-WIDE DISCOUNTS!In-Stock and Ready to ShipShips PRIORITY ! BRAND NEW ITEM White Industries 175 mm A30 MOUNTAIN Crankset with Spindle - BLACK FINISH (includes 1 pair of crank arms and spindle )This is a new item from White Industries. It is a set of R30 crank arms with the 30 mm Mountain spindle. Read below for more details. Brand new set of White Industries Cranks and Bottom Bracket Bolts. Includes lockring for Chainring installation. These Cranks are truly a work of art! This listing does not include any chainring. These are sold separately, see our eBay Store. Manufacturer description: For a long time square taper was king, but in recent years the development of new axle standards have redefined crank and drive train standards. White Industries answers this change by offering the MR30 crankset line.The A30 is part of the 30mm spindle line of cranks which also includes the M30, R30 and G30 models. The “A” stands for adventure and the “30” is for the 30mm spindle. While this may seem like a new model, it’s just the R30 road arms mated to the M30 mountain spindle, and finally it is given a name. This combo lives in that wide open world occupied by bikes that are neither road nor mountain and can be the perfect solution when more chainring-to-chainstay clearance is needed, without the wider Q factor of the M30 crank. Check out the table below and compare the specs of all four crank combinations to help decide which model would best suit your needs.Note: Spindle, crank bolts, extractors, adjusting collar, and chairing lockring included. Chainrings and bottom bracket sold separately.FeaturesCompatible White Industries chainrings:TSR 1X/singlespeedCompatible with 8/9/10/11/12 and 12 flat-top chainsShimano 12 speed chains must use a SRAM Eagle 12-speed PowerLock connectorTSR Boost 1X/singlespeedCompatible with 8/9/10/11/12 and 12 flat-top chainsShimano 12 speed chains must use a SRAM Eagle 12-speed PowerLock connectorVBC 2XCompatible with 9/10/11 speed chains and derailleurs (12 speed are too narrow)Campy and SRAM derailleurs not recommendedShimano mountain 9/10/11 speed derailleurs are best with these rings on this crankAlso compatible with Wolf Tooth “CAMO Direct Mount Spider For White Industries”5 different White Industries 30mm bottom bracket optionsAll 30mm cranks and spindles are made from U.S. sourced 2024-T365 aluminumSpecificationsDesigned around a 96mm OBW (Outer Bearing Width)This is the allowable outside-to-outside measurement of your BB bearings (with seals) when they are mounted to your frame. The bearing preload collar on the crank is adjustable and can accommodate slightly wider or narrower widths (+/- 1mm) than the target number.Designed to fit 68mm/73mm or 86mm/92mm bottom bracket shells2x 2.5mm cup or spindle spacers needed on 68mm or 86mm shellsPart #BB30KIT includes both types of spacersSee “MARG30 Crank and Bottom Bracket Compatibility Chart” document below for BB/spacer infoWeight: 565g (170mm length w/spindle)Q factor: 163.5mmChainlines:1x standard TSR ring (3mm offset, facing inward)1x Boost TSR ring (0mm offset/flat)1x standard TSR ring (flipped outward for Rohloff or Super Boost)2x VBC rings (measured between the 2 rings)49mm52mm55mm47.5mmToolsCrank arm mounting boltsTorque wrench (min 40 ft lbs or 54 Nm)10mm hex bit socketChainring lockringPark BBT-22 or Shimano BBT-32Bearing preload collar1.5mm hex keyExtractor capPark SPA-2 pin spanner with .090”/2.3mm pins (this is the red one)TorqueChainring lockring: 30 ft lbs (40 Nm)Crank arms: 35-40 ft lbs (48-54 Nm)We recommend retorquing arms after the first rideBearing preload collar bolt: ¼ turn past snug (more may crack the collar)Extractor caps: As tight as feels comfortable without the pin spanner slipping out of the holes M30/A30/R30/G30 Crank Comparison ChartMountainM30AdventureA30RoadR30GravelG30Crank armM30 Mountain armsR30Road armsR30Road armsM30Mountain armsSpindleM30Mountain spindleM30Mountain spindleR30Road spindleR30Road spindle1x chainline(3mm offset ring, facing inward)49mm49mm46.5mm46.5mm1x Boost chainline (0mm offset/flat ring)52mm52mm49.5mm49.5mm1x chainline (3mm offset ring flipped outward) *55mm*55mm52.5mm52.5mm2x chainline(measured between the 2 rings)47.5mm47.5mm45mm45mmQ factor176mm163.5mm158.5mm171mmWidth between inside of arms(for chainstay clearance)149.6mm137mm132mm144.6mmWeight575g(175mm w/spindle)565g(170mm w/spindle)560g(170mm w/spindle)570g(175mm w/spindle)BB shell widths68mm/73mm or 86mm/92mm68mm/73mm or 86mm/92mm68mm or 86mm68mm or 86mm**OBW (outer bearing width)96mm(+/- 1mm)96mm(+/- 1mm)91mm(+/- 1mm)91mm(+/- 1mm)*55mm chainline for Rohloff and Super Boost hubs**This is the allowable outside-to-outside measurement of your BB bearings (with seals) when they are mounted to your frame. The bearing preload collar on the crank is adjustable and can accommodate slightly wider or narrower widths (+/- 1mm) than the target number.Check out our eStore for: ChainRings and custom extractors in many colors. Notice: Pictures may not represent exact size of this particular listing but are used for general representation purposes. You will receive the size stated in listing. WE ARE AN AUTHORIZED WHITE INDUSTRIES DEALER. WE SELL AT THE LOWEST PRICES ON THE INTERNET. WE WILL MATCH OR BEAT ANY ADVERTISED PRICES.

Price: 349 USD

Location: Lorton, Virginia

End Time: 2024-02-18T17:35:30.000Z

Shipping Cost: 0 USD