Description: Provides a strong clean signalYour aftermarket processors and amplifiers need clean and robust line-level input signals, especially when getting them from a factory amplifier's speaker outputs. Wāvtech's link6 line output converter can produce up to 10 volts of output per channel — which should be more than enough for most connected aftermarket gear.6-channel summing processorThe link6's six channels can get routed into a number of different configurations. For example, the link6 will work great in a factory system with separately powered tweeters, midrange drivers, and woofers.Multi-function remote and auxiliary inputWāvtech lets you plug your phone or player directly into the link6's Auxiliary input to make it a music source. The wired remote lets you select sources as well as control the master volume, the Aux level, and the independent channels 5/6, usually used for subs.Works with factory ampsThose speaker-level inputs can handle up to 40 volts, the equivalent of 400 watts, so you can use one in a premium system with a factory amplifier. This way, you can retain all your vehicle's factory audio options and warnings when installing a new aftermarket amplifier. The link6's gain controls and clip lights help you keep the signal level under control and distortion-free.READ LESSProduct highlights:active 6-channel line output converter and summing processordesigned to work with factory systemswired remote and 16-foot cable includedmulti-function remote controls master volume, Aux volume, Ch 5/6 volume, and source selectionprovides up to 10Vrms output per channel3.5mm Aux and speaker-level inputsselectable speaker-level input sensitivity (20V or 40V) via internal jumperauto turn-on via DC offset or audio detectgain controls and clip lightsselect for 2, 4, or 6 input channels2-way signal summing with subwoofer signal pass-throughMore Info:aluminum chassis12-volt turn-on lead outputspeaker-level inputs feature load resistance to prevent factory stereo shut-downoptional plug-in parallel load resistors available for vehicles like some newer Chrysler vehicles that need less resistance for the factory stereo's load-sensing to workwiring, fuse, and hardware not included with device18-gauge power and ground leads and a 1-amp fuse recommendeddimensions:processor: 5.8"W x 1.1"H x 4.7"D (not including terminals and jacks)remote: 1-1/8"W x 1-1/2"H x 1-13/16"Dwarranty: 1 year60-day returnsMFR # LINK6Item # 241LINK6California customers: Proposition 65 WARNING.
Price: 215 USD
Location: Berlin, Maryland
End Time: 2024-09-23T15:56:59.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Wavtech
MPN: link6
Type: Line Out Converters
Model: link6
bullet_point1: Provides front, rear and subwoofer outputs for your aftermarket a
bullet_point2: When necessary, the link6 combines the sum of the frequencies pre
bullet_point3: Multi-function remote provides four unique configurations, based
