WARM White Headlights, Taillights & Reverse fit Axial SCX24 Dodge Power Wagon

Description: Warm White Headlights, Warm White Reverse lights and Red Taillights that fit your Axial SCX24 to give your crawler a more authentic look! 1940's didn't have HID Halogens! Headlights and Red tailights are always on. White reverse lights come on when reversing. Very cool! This includes a set of 6 LED lights that plug into your receiver. Wired long enough to hinge with the body, like the original. How we installed ours:Remove lens from stock headlight (use a toothpick or other suitable item to depress lens holder on side of headlight, pop out lens)While holding the back of the black headlight, use a blunt object to carefully push the stock LED out of the headlight toward the rear of the vehicleThread stock headlight through the body (or cut it off)Cut a slit in or enlarge the hole in the plate that holds the driver so that you can either slip the wires through or fit the new/larger ESC connector throughThread wire through the hinge on the rear of the bodyThread new LED through the body and out the cab hole. Keeping the wires straight, feed the wires out of the cab and behind the headlight holder. Carefully push new headlight into black headlight holderUsing a small needle nose pliers, small flat head screwdriver, etc carefully bend the LED wires while gently pulling the wires back into the body. Use caution to not crush or break the resistor on the red wire. Use caution to not break any wires. We have done many light installs and have not had any issues but you do have to be cautious and gentle. Reinstall headlight lensesTape rear light wires against tail gate or truck bed to hold lights in placeGlue or tape Red LEDs into red rear tail light lenses. E6000 and Shoe Goo work well for this. Lenses can pop out easily so we use glue. Glue or tape Warm White LEDs into clear rear tail light lenses.Plug lights into the receiver in the slot marked Rev (you can usually see the R from the front of the vehicle without removing the ESC). Be sure the yellow wire is on top.Note: reverse lights work with the stock Power Wagon ESC. Reverse light function may not work if you are using an external ESC plugged into the stock receiver or a 3rd party ESC. If you are using an ESC that is not stock, you may want our Headlight/Taillight kit without the reverse lights. Rock lights available in separate listing and as combo packages. Contact us if there is something you want and do not see a listing for. See our other listings that fit SCX24 Dodge Power Wagon See our other listings for headlights, reverse lights, rock lights, taillights, different colored bumper/fog lights and lights for additional vehicles. USA SellerAssembled in the USA In StockFast shipping

Price: 17.01 USD

Location: Cincinnati, Ohio

End Time: 2025-01-12T03:00:26.000Z

Shipping Cost: 4.99 USD