Description: This Item includes: 1PC Stepper Motor Nema42 Single Shaft 110BYGH201-001 4200oz-in 8A 19mm shaft 1PC Stepper Motor Driver DQ2722MA 110V-220V 7A 300Micro1pc Breakout Board& cable 1, Stepper MotorTechnical SpecificationsPart No.: 110BYGH201-001 Single shaft Frame Size: NEMA42Step Angle: 1.8 degreeVoltage: 5.36VDCCurrent: 8 A/phaseResistance: 0.8Ohm/phaseInductance: 15mH/phaseHolding torque: 3000Kg-cm 4200oz-inRotor inertia: 1620 g-cm2 Number of Wire Leads: 4Weight: 11.7kgLength: 201mm1 stepper motor 2. stepper motor driver:DQ2722MA Introduction The DQ2722MA is full digital 2 phase stepper driver based on DSP control. The drive voltage of which is from 110V to 220VAC. It is designed for use with the 2 phase hybrid stepper motor of all kinds with 86mm to 130mm outside diameter, regulated phase current1.0A to 9.8A. The circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly without noise and vibration. The highest micro step is 60000ppr. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, computer embroider machine, packing machine and etc. Feature High performance, low price 16 channels constant angle, constant torque micro steps, highest micro step: 60000ppr Highest response frequency: 200Kpps Current of winding will be reduced by approximately 50% when no step pulse command is received for 0.1 second Opto-isolated signal I/O Drive current is adjustable in 16 channels from 1.0A/phase to 9.8A/phase Single power supply from 110V to 220VAC Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 5s and it is recovered when stepper driver power on or signal MF changes from low level to high level)
Price: 281.2 USD
Location: Rowland Heights, California
End Time: 2024-09-17T07:35:03.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Full Step Angle: 1.8° (200 Steps)
Brand: wantai
Current Type: DC
Custom Bundle: No
Model: 110BYGH201-001
Shaft Diameter: 14mm
MPN: Does Not Apply
Insulation Class: B (Max 266°F)
Country/Region of Manufacture: China
Wiring Configuration: 4-Wire Bipolar
Modified Item: No
Holding Torque: 4200oz-in=30N.M
