Valve Cover Gasket-Mopar Small Block V-8 RG-1607FR Set of 2 "ULTIMATE" silicone

Description: VALVE COVER GASKET - "ULTIMATE" Siliconefor Chrysler, Dodge, Plymouth - SMALL BLOCK V8 "ULTIMATE" SILICONE IS FIBERGLASS REINFORCED SILICONE This may be the last gasket you will ever need to buy – Basically, the gaskets have a layer of fiberglass that is centered between 2 layers of silicone which allows the material to maintains its original dimensions when subjected to changes in temperature and humidity. As a result, it gives the material dimensional stability and has a higher tensile strength. This is the absolute most stress that a material can resist while being pulled or stretched. – Not only is the material resistant to deterioration by weathering and engine oil but also withstands temperatures and remains flexible over the temperature range of -100 to 500 degrees Fahrenheit. – Additionally, the gaskets are made from aerospace mechanical grade silicone and will not break down and deform or crack up like cork or neoprene. Consequently, this is one tough gasket. – Finally, this is a reusable gasket. FITS: MOPAR SMALL BLOCK V-8: 273, 318, 340, 360 CID Part number: RG-1607FR Corresponding part #'s: SFL1607; SFL VS 13395; Moroso 93050; SFL1608; P4452089; MVC-1FR Set of two silicone gaskets - 1/8" thick Gaskets have five bolt holes Reusable. INSTALLATION INSTRUCTIONS: Wash the cover and cylinder head surfaces with solvent. Remove all traces of oil. The gasket MUST be installed DRY (No oil or lube of any type). TORQUE to 45-50 INCH POUNDS DO NOT OVER TIGHTEN. Over tightening causes the gasket to bulge out or squeeze out. *** *** *** *** *** *** *** *** *** *** *** *** *** *** To reuse gasket: Wash the gasket briefly in hot soapy water. Rinse well. Dry all surfaces thoroughly. Reinstall using the above installation instructions. Proudly made in the USA. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USE CORK? GET REAL! REAL Gaskets that is…REAL Gaskets Tennessee is a manufacturer of silicone rubber gaskets for aircraft, automobile, and motorcycle engines. Our silicone rubber gaskets are made from aerospace mechanical grade AMS silicone, designed to withstand temperatures up to 400 degrees Fahrenheit and to last the life of the engine. Our gaskets seal uneven surfaces, eliminate corrosion and are 100% reusable. We manufacture valve cover gaskets for: Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and Wright radial piston aircraft engines. Automobiles: Ford, GM, Mopar, Porsche and VW automobile engines. Motorcycles: BMW, Harley-Davidson, Suzuki, BSA, Ducati, Moto Guzzi, Norton, Triumph, Saab and most other motorcycle engines. If you are tired of oil leaks, then a silicone rubber gasket is the only way to go, and REAL Gaskets Tennessee is the only place you can get “The Original” silicone rubber gasket. MADE IN THE USA.

Price: 49 USD

Location: Elizabethton, Tennessee

End Time: 2024-09-03T20:45:08.000Z

Shipping Cost: 11.95 USD