V2 V2.4 HolyBro Flight Tekko32 Controller F4 50A MPU6000 for F4 HV F4 Stack

Description: HolyBro Kakute-F4 V2.4 Stacks MPU6000 F4 Flight Controller Tekko32 F4 50A /60A / 65A 4in1 ESC Atlatl HV V2 VTX for FPV DroneDescription:The Holybro Kakute F4 V2.4 Flight Controller includes plug-and-play for DJI O3 HD camera plug, 4in1 ESC ports, barometer, OSD, 5x UARTs, logging capability with built-in flash , 5V and 9V/3A BEC, easy soldering layout and much more. The Kakute F4 V2.4 is for DJI HD ready. It has an easy plug-and-play port with an on-board 9V/A regulator designed to power your HD video transmitter like for DJI O3 Air Unit & Caddx Vista while supporting analog system. It has 5x dedicated UART ports with built-in inversion for peripherals. It is also ready for autonomous flight with the on-board barometer. There are LED & buzzer pad, I2C pad (SDA & SCL) for external GPS/MagnetometersSpecification: MCU - STM32F405IMU - MPU6000Barometer - BMP280OSD - AT7456E5x UARTs (1,3,4,4,6,7)128 Mbit Dataflash chip Battery input voltage: 2S-8S BEC 9V/3A - Optimized for DJI O3 Air unitBEC 5V/2A 7x PWM Outputs (6 Motor Output, 1 LED)Supports serial receivers (SBUS, iBus, Spektrum, Crossfire, ESLR).Mounting - 30 x 30mm, Φ4mm hole with M3 GrommetsDimension - 37x37mmWeight – 7gJST-SH1.0_8pin port (For 4in1 ESCs)JST-SH1.0_6pin port (For DJI/Caddx HD System and other VTX) Manual & Pin DiagramPackage Includes:1x Kakute F4 V24x Anti-Vibration Silicone Grommet Insert *41x JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System)1x JST SH 6pin 100mm cable(for Caddx HD Systems)1x JST SH 8pin 100mm cable(for ESCs) The Holybro Kakute F4 V2.4 Flight Controller includes plug-and-play for DJI O3 HD camera plug, 4in1 ESC ports, barometer, OSD, 5x UARTs, logging capability with built-in flash , 5V and 9V/3A BEC, easy soldering layout and much more. The Kakute F4 V2.4 is for DJI HD ready. It has an easy plug-and-play port with an on-board 9V/A regulator designed to power your HD video transmitter like DJI O3 Air Unit & Caddx Vista while supporting analog system. It has 5x dedicated UART ports with built-in inversion for peripherals. It is also ready for autonomous flight with the on-board barometer. There are LED & buzzer pad, I2C pad (SDA & SCL) for external GPS/MagnetometersKakute F4 v2.4 Specification: MCU -STM32F405IMU - MPU6000Barometer - BMP280OSD - AT7456E5x UARTs (1,3,4,4,6,7)128 Mbit Dataflash chip Battery input voltage: 2S-8S BEC 9V/3A - Optimized for DJI O3 Air unitBEC 5V/2A 7x PWM Outputs (6 Motor Output, 1 LED)Supports serial receivers (SBUS, iBus, Spektrum, Crossfire, ESLR).Mounting - 30 x 30mm, Φ4mm hole with M3 GrommetsDimension - 37x37mmWeight – 7gJST-SH1.0_8pin port (For 4in1 ESCs)JST-SH1.0_6pin port (For DJI/Caddx HD System and other VTX) Tekko32 F4 4in1 50A ESCFast F4 MCU @150Mhz / PWM output up to 96K / 4~6S / BLHeli32 / 30x30 Features:New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)PWM Frequency: 16k to 96kSeparate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.Tekko32 F4 4in1 60A ESCFast F4 MCU @150Mhz / PWM output up to 96K / 4~6S / BLHeli32 / 30x30 Features:New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)PWM Frequency: 16k to 96kSeparate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.Tekko32 F4 Metal 4in1 65A ESC F4 MCU @150Mhz / Metal-Cased MOSFET / PWM output: 16k ~96k PWM / 4~6S / BLHELI32 Powerful & reliable metal-cased MOSFET 4in1 ESC with smooth control and quick response.Features:New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)PWM Frequency: 16k to 96kMetal-cased MOSFET for excellent heat dissipationMassive on-board capacitance for noise filtering at 2068uf3 oz copper PCB design to allow bigger current and better heat dissipationSeparate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.Atlatl HV V2FeaturesCompatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.SmartAudio input allows remote control by the flight controller. Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.All parameters are controllable via push-button on the side of the unit, for cases where SmartAudio is not used.MMCX connector is durable and easy to use. Rated for 100’s of mating cycles. Easy and quick antenna changes. No more ripped-off UFL connectors.LED indicators for channel, band, and power. Allows easy check of vTX parameters simply by glancing at the quad.Variable transmit power from 25 mW to 800 mW. Use 25 mW for a race and then easily switch to 800 mW for freestyle.0.5 mW True Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.Built in microphone, so you can listen to your motors while you fly, no matter how far away you fly.Standard 36mm form factor allows you to mount the Atlatl directly on your flight controller stack.Kakute F4 v2.4 Manual & Pin DiagramPackage Includes: 1x Kakute F4 V2 STACK (FC+ESC) 1x Electrolytic capacito: 1000uF 35v 1x 8pin to 8pin 1mm pitch 65mm cable 1x 8pin to 8pin 1mm pitch 25mm cable 1x JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System) 1x JST SH 6pin 100mm cable(for Caddx HD Systems) 1x Kakute F4 V2 STACK (FC+ESC+VTX) 1x Electrolytic capacito: 1000uF 35v 1x 8pin to 8pin 1mm pitch 65mm cable 1x 8pin to 8pin 1mm pitch 25mm cable 1x JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System) 1x JST SH 6pin 100mm cable(for Caddx HD Systems) 1x 80mm SMA–MMCX Cable 1x JST GHR 4pin 150mm cable Welcome to My Store

Price: 52.64 USD

Location: 深圳

End Time: 2024-02-12T08:50:52.000Z

Shipping Cost: 0 USD