Uplink 2550-CB Full Data GSM Wireless Communicator Live Operator Assistance

Description: New Uplink 2550-CB P/N # 2550CBULFull Data GSM Wireless Communicator Commercial Fire Alarm Communicator Compatible with all major fire-control panels Secure Web Management Dealer Portal Live Operator Assistance 1. Introduction: Uplink’s MODEL 2550-CB GSM Alarm Communicator is an ETL Listed alarm and critical event communicator designed to interface with most manufacturers’ alarm panels that incorporate a digital telephone dialer. The 2550-CB features a “dialer capture” interface to the alarm panel. If the alarm panel’s TELCO connection is compromised, or if no TELCO connection is present, the 2550-CB will “intercept ” the alarm panel’s digital dialer output when the panel has an event to report, and communicate with the panel as if it were a central station alarm receiver. Once the 2550-CB communicates with the alarm panel, it transmits the alarm information to the central station receiver in either Contact ID (SIA-DC05) or SIA (SIA-DC03) format. The 2550-CB uses GSM technology to receive programming and send event information to the central station and can be used as the primary or backup communications path as a digital dialer (or DACT). 2. Key Features: A. FULL DATA Reporting. Compatible with most alarm panels using Contact ID (SIA DC-05 Standard) or SIA FSK Level 1 (SIA DC-03 Standard) digital dialer formats. All information sent by the alarm panel in either format (account number, zone information, user IDs, etc.) will be sent to the central station using the telephone line or the GSM network. B. Telephone Line Supervision. Features a built-in telephone line monitoring circuit designed to detect voltage (in the On-Hook state) or voltage and current (in the Off-Hook state). If insufficient voltage or current is detected, a relay is activated causing the unit to “intercept” (or “capture”) the alarm panel’s digital dialer output and substitute the GSM cellular network for the Public Switched Telephone Network as the communications path for sending event information. C. Panel to 2550-CB Cable Supervision. Monitors continuity of the cable connecting the panel’s telephone dialer to the 2550-CB. This feature is activated through the web or by calling Uplink Customer Service at 1- 888-9-UPLINK (1-888-987-5465). D. Zone Inputs. Reports programmed events to the central station. Note: One suggested use for this feature is to allow a summary alarm output from the alarm panel to be connected to one of the inputs and report a summary alarm event to the central station. This prevents circumventing the TELCO supervision circuit and assuming that a compromising PSTN line is operational. This is a unique feature not found in many other dialer capture products on the market today. E. Three Relay Outputs. Activates upon the occurrence of one or more of the following Trouble conditions: - Cellular Network Loss - No Central Station Acknowledgement - AC Loss - Low or Missing Battery - Telco Line Loss - Panel/MODEL 2550-CB Cable Supervision Trouble - Enclosure Tamper - Activation of Input(s) - Unit Disabled by Dealer Command - Watchdog Circuit Activation - Catastrophic Failure Condition F. Power Source Monitoring (AC & Low Battery Reporting). Reports low battery conditions to the central station when voltage drops below 10.2 VDC. 4 Reports Low Battery Restoral at 11.4 VDC. It can also be programmed to report Loss of AC power to the central station. This occurs at 102 VAC and restores at 107 VAC. G. Automated Testing. Sends an automated test signal to the central station on a monthly, weekly or daily interval as programmed. H. GSM Network Supervision. Supervises the local GSM network. If the unit no longer locates the local GSM network, one of its output relays activates to report this trouble condition locally. I. Status/Received Signal Strength LEDs. The five LEDs indicate the current operational status and are visible from outside the enclosure. These LEDs can be placed into Received Signal Strength Indication mode (RSSI) to assist in selecting the optimal mounting location for transmitting and receiving cellular radio signals. II. J. Easy Service Initiation. Ships with an active SIM card, with easy activations available via the Web or by calling Uplink Customer Service at 1-888-9-UPLINK (1-888-987-5465). Requires the central station receiver phone number and/or its IP address and Port number. K. Web-based Services. Available at uplink web and include: a. immediate, real-time activation b. history of past event transmissions c. initiation of a test report d. the ability to query the unit and receive a real-time radio report status including a Received Signal Strength reading e. programming inputs and other internally generated events L. ETL Listed. Electrical Testing Laboratories (ETL) was founded in 1896 by Thomas Edison, and is one of the oldest product safety testing laboratories in the world. Certification by ETL assures that the 2550-CF has been tested to meet US safety and performance standards. Like the UL Mark, the ETL Listed Mark shows that our product has been independently tested by a Nationally Recognized Testing Laboratory (NRTL) and that it has met the minimum requirements of widely accepted product safety standards. The ETL Listed Mark is recognized and readily accepted by manufacturers, retailers, distributors and authorities having jurisdiction (AHJs). The Model 2550-CB unit is ETL Listed and conforms to ANSI/UL Standards 365 and 1610 for Police Station Connected and Central Station Monitored commercial burglar alarm systems. It is perfectly suited for use in any UL certificated alarm system that conforms to the above standards. (See the UL Compliance Section of this manual for complete details.) Included : - Installation & User’s Guide- Quick installation instructions- Uplink Full Data 2550-CB Unit- Mobile Mark Communication Antena PSKB3-900/1000S - Comercial Grade Network Cable PC5B-2924-3GY Note : · 15-Day Warranty on all items · If the item is defected, the same one will be exchanged, no refund · Buyer outside the USA has to pay all return shipping cost

Price: 55 USD

Location: Westminster, California

End Time: 2024-03-10T22:15:07.000Z

Shipping Cost: 0 USD