TILTA WLC-T03 K1 Nucleus-M Wireless follow focus Lens Zoom Control Aerial Photo

Description: The Tilta Nucleus-M Wireless Lens Control System Partial Kit I contains the essential elements for pulling focus wirelessly. The kit includes the Nucleus-M FIZ hand unit controller, one Nucleus-M motor, one removable lens belt, a motor power cable, two marking disks for the hand unit, a lanyard for the hand unit, and a battery charger. The system enables pulling focus, iris, or zoom on your lens, and if you are using a lens that does not have standard cine-style gears, then use the included lens belt to add gears to your lens. This partial kit is a single-axis system, but the hand unit will allow you to control additional motors (not included) so you can control more than one lens ring. The system can wirelessly pull focus from up to 1000' away, and batteries can power the hand unit for a The Nucleus-M is a revolutionary and highly customizable 3-channel wireless lens control system. It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button. The wireless range of both the hand unit and hand grips is 1,000 feet and with the planned upcoming transmission upgrade, the range can reach up to 1 ¼ miles! This makes it ideal for drone or car-mounted shots. The hand grips can be attached to the included rosette mounts for handheld operation and can also be attached to top bar-based gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters or to ring-based gimbals with the optional Nucleus-M Hand Grip Universal Gimbal Ring Adapters. Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the motors and hand unit/hand grips to the same channel and you will have full control. The motors allow for automatic calibration of the lens as well as manual calibration if you are using lenses that don't have hard end stops at close focus and infinity. The motors are designed to clamp onto 19mm or 15mm rods (with the included rod bushings). This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup. Every motor has a 0.8 mod, 35 tooth, 32 pitch gear attached, which is the standard gear size for cinema lenses. Endless lens control options in the palm of your hand: The Nucleus-M allows you to wirelessly control the motors with either the FIZ hand unit or two handles. If desired, split the control between any of the possible control options for endless possibilities. Small, compact hand unit that offers 3-axis control: Control focus, iris, and zoom with the small, form-fitted hand unit. The iris wheel can also be set to act as a speed control for the zoom toggle. Perform effortlessly accurate focus pulls: The hand unit offers an intuitive focus mark system that allows you to set marks that vibrate as the hand wheel passes them. Additionally, the hand unit and handles both offer programmable hard stops to allow you to easily focus between a pre-selected range. Function as a one-person camera team & keep the form factor of your camera setup to a minimum Control any lens: from small DSLR lenses to large cinema zoom lenses Product introduction 1. The Nucleus-M is a wireless 3 Channel system. 2. Connections between the FIZ hand unit and the two hand grips to the motors are completely wireless. 3. Each motor has a built-in MDR unit, saving space and setup time. 4. A single motor can be powered directly from the camera’s battery though a 7-Pin to P-TAP cable then daisy chained via 7-Pin to 7-Pin cable to run additional motors. 5. There is no limit on the amount of motors an operator can attach per channel. 6. The FIZ hand unit and two handle grips have a wireless range of 1000 feet. 7. The signal from the FIZ hand unit can be upgraded to 1 1/4 miles with an additional accessory. 8. Both hand grips and FIZ hand unit run off (2) 18650 batteries. (Batteries are NOT included.) 9. When fully charged the batteries in the hand grips can last up to 2 days. 10. The batteries in the FIZ unit can last up to 10 hours. 11. FIZ hand unit is capable of controlling 3 channels – focus, zoom, and iris as well as overriding the hand grips. 12. 0.8 mod, 35-tooth, 32 pitch gear with a face width of 10mm 13. Motors can calibrate on lenses without hard stops – such as photo-lens with follow focus gears. 14. Motors fit standard 15mm and 19mm Rods 15. Ideal for Gimbal, Drone, and Shoulder-mounted setups Tilta Nucleus-M FIZ Hand UnitThe Tilta Nucleus-M FIZ Hand Unit provides three-channel wireless focus, iris, and/or zoom control as part of the Nucleus-M lens control system. The hand unit features a large wood-edged focus knob, a zoom joystick, an iris wheel, and a backlit LED display window. Select from low, medium, and maximum transmission ranges to best suit your working distance and battery reserves. The Nucleus-M FIZ Hand Unit's choice of 15 2.4 GHz channels minimizes the chance of interference in high-traffic areas. Set up to 10 soft stops with vibration for focus pulls, and calibrate lenses automatically or manually. Wireless run/stop is available for select cameras using the hand unit and separately available cables. The hand unit is powered by two separately available lithium-ion batteries and can operate for up to 10 hours on a single charge. (4x 18650 Battery included for free) Features 3-channel wireless lens control unit Control focus, iris, and/or zoom Short-, medium-, and long-range transmission options 15-channel selection minimizes outside interference Powered via two 18650 rechargeable lithium-ion batteries (not included) Up to 10-hour runtime on a single charge Ambidextrous design with large wood-edged knob Tilta Nucleus-M FIZ Lens Control MotorThe compact Tilta Nucleus-M FIZ Lens Control Motor features an integrated motor drive, eliminating the space of a separate drive box and enabling a quicker setup. Power the motor using a separately available D-Tap cable and power source, or daisy-chain to another motor using a 7-pin cable. The Nucleus-M wireless motor includes a cine standard 0.8 Mod drive gear and a 19mm rod adapter with a bushing for mounting onto a 15mm rod. The motor features automatic or manual calibration, a display window, and high, medium, and low torque settings. Features Brushless motor with an integrated motor drive Cine-lens standard 0.8 Mod, 35-tooth, 32-pitch gear Motor clamps onto 19mm or 15mm rods (with included bushing) Power via separately available D-Tap cable or daisy-chain to additional motors Automatic and manual calibration For focus, iris, or zoom control High, medium, and low torque settings Status display window Package Including: Partial Kit I 1x Wireless FIZ hand unit 1x Brushless wireless motor with 19mm rod support and 15mm rod bushings 1x Photographic Lens Follow Focus Adapter 1x 74cm 7-pin to P-tap motor power cable 1x Follow focus marking disks 1x Wireless FIZ hand unit strap 1x 18650 quad battery charger 4x 18650 battery (Free Gift) Payment We accept payment from:- PayPal (with verified and confirmed address)Full payment must be received before shippingPayment must be paid within 7 days after bidding. Delayed payment may result in order cancellations. Payment MethodsPayPal- With verified and confirmed address- PayPal account holder must also be the receiver- We will only ship to addresses corresponding to the PayPal payment- No surcharge REMINDER: If you require any additional service, please be sure to include your request with payment, we will try to help you to the best of our ability. And if possible,please also provide your phone number (country code + area code + phone number) in order to help us serve you better. Shipping Usually the goods will be delivered via International Post Air Mail Service after the payment has been paid in full and cleared. Please allow within 48 hours for shipment arrangement after completion of payment. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Please be noted: that the delivery time mentioned on our page is for reference only. Although the actual shipping time is punctual in most occasions, in some cases delivery time may vary due to traffic congestion, adverse weather, acts of custom inspection, etc. We will try our best to avoid such situations, however, please understand that some of these situations are beyond our control, and we are not reponsible for them. Return We provide 30 day return policy for products sold. If, for any reason, you are not satisfied with your purchases, full refund of the purchase (excluding the shipping expenses) can be applicable under the following circumstances: ALL accessories must be unused; ALL accessory packages must be unopened. ALL items must be intact and undamaged (except for defects in manufacturing). Items must be in good conditions with all original accessories, manuals, and packing materials. Any missing parts or damaged items will result in rejection on the return. In case of any defectives found, only defects in manufacturing are accepted as the reason of return. No refund is given if defects are caused by misuse of buyers. Our customer service officers will gladly contact you for further arrangement upon your request. All shipping cost thus generated is paid by the buyer. Feedback We maintain high standards of excellenceand strive for 100% customer satisfaction.Positive feedback is very important to us.We request that you contact us Immediately BEFORE you give us neutralor negativefeedback,so that we can satisfactorily address your concerns. Our office hour:-9:00a.m.-- 6:00 p.m.(GMT+8) of Monday to Friday-And our company is closed on Weekend and Public Holiday (China)We apologize for the late reply during the holidays! But hope that our customers give us their understanding. About US We are professional photography equipment seller! You will find many excellent and affordable items here!

Price: 695 USD

Location: Shenzhen

End Time: 2024-06-15T11:09:50.000Z

Shipping Cost: 0 USD