TiAL Authentic MVR 44mm External Wastegate & 50mm Q Series Black Blow-Off Valve

Description: TiAL MVR MV-R 44mm External Wastegate & 50mm Q Series Black Blow-Off Valve Description<<<<<<<<<<<<<<<< IN STOCK >>>>>>>>>>>>>>>>> BRAND NEW IN BOXYou are bidding on a Brand New Set of Tial***BOTH ARE BLACK COLOR******We offer different color and PSI options.Please contact us for information..***Includes:Tial MV-R 44mm Black V-Band Authentic External WastegateTial Q Series Black 50mm Authentic Blow-Off Valve -11 psi TIAL EXTERNAL WASTEGATE 002949 The MV-R 44mm wastegate is more compact than any current 44 or 46mm wastegate on the market. You get two top air ports and three bottom air ports for easy install. This unit is a direct bolt on for our V44. The MV-R has an optional extreme high temp casting available for Motorsport applications SPECIFICATIONS : •High temp NiCrFe based alloy valve and 316SS valve housing offer longer product life compared to competing designs.•High temperature silicone Nomex reinforced actuator diaphragm.•17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature and resists "relaxing" up to 900F (483C).•Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing.•All Stainless Steel hardware.•Mating weld flanges are 304L•Color anodized aluminum actuator (Silver, Red, Blue, Purple, Black).•3 lower ports and two top ports for easy install, no need to rotate the actuator top at all, plugs included for unused ports.•Ultra compact design fits in very tight spaces•V-Band inlet and outlet make install easy, flanges and clamps are in the box!•Integrated -4 AN water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. These are leak tested after installation from the factory and can be removed if not utilized.•Extreme high temp casting available for Motorsport applications WHATS IN THE BOX : Included with every TiAL MV-R:MV-R Assembly2 TiAL -4 removable water fittingsMV-S Valve SeatInlet V-band clamp & FlangeOutlet V-Band Clamp & Flange2 TiAL Air FittingsPlugs for unused air portsExtra actuator springs ------------------------------------------------------------------------------------------------------------------------------------------------ TIAL Authentic Blow-Off Valve Part number 002573The first revision of TiAL's original blow-off valve, the Q Series flows 60% more than its predecessor and bolts to any standard TiAL flange without welding. An aluminum weld base mounting flange cut for 2-1/2'' pipe and aluminum V-band mounting clamp with stainless steel hardware create a durable corrosion-free appearance. A banjo-type aluminum air fitting and bolt with oversized 10mm hose barb allow quick actuator response. Springs available to accommodate various vacuum levels and supercharged applications. Features:For use on turbo-charged and super-charged applications (Paxton, Vortec, etc.) The body and all internal components are CNC-machined from 6061 aluminum alloy. It features a large 1.98'' (50.5mm) valve.The V-Band design aluminum mounting clamp gives a very clean and unique appearance. The clamp uses Stainless Steel hardware for a long lasting, corrosion-free appearance.The valve seal utilizes a Viton O-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are PTFE-lubricated, hard anodize-coated for wear resistance.The Blow Off Valve also comes with a machined aluminum banjo-type air fitting and bolt, with over sized 10mm hose barb for quick actuator response. The actuator has a high temp silicone Nomex-reinforced diaphragm for long life.An aluminum weld base mounting flange is furnished with each unitThrough countless hours of R&D Tial was able to make the same size valve flow a staggering 60% more than the original design - that means 60% more air is blown off per cycle! This is the highest flowing BOV on the marketA single Q BOV can support up to 1,800hp-11 psi spring for supercharged applicationsIncluded with Every Tial Q Series Blow-Off Valve:Q Series BOV AssemblyTiAL V-band ClampV-band Weld FlangeTiAL Air FittingHigh Pressure O-ringFlange MaterialsAluminumPipe SizeFlange cut for 2.5" IC pipeColorsBlackSpring Pressures -11psiThreadM10 x 1.0 Ask us about saving money with our PACKAGE DEALSCP Cometic ACL Ferrea and ARP KitsCustom Made Package DealsAEM Package DealsPackage DealsAsk us about combining purchases for package deal auctionsPistonsRodsBearingsHead and Main Studsand more...ShippingWe ship via UPS/USPS/FEDEX/ONTRAC ground depending on the address of buyer unless instructed to do differently.We also offer expedited shipping at an extra cost.International shipping rate applies to addresses in all other locationsCustom/duty/brokerage fees, if any, on Canada and international orders are the responsibility of the buyer.Item ships within one business day after the payment has cleared or same day if paid by 12pm PST unless additional handling stated. Item purchased is shipped from West or East Coast Warehouses of ours depending on availability.There's a shipping surcharge for shipments going to USPS PO Boxes, AF/APO boxes and any address that is out of 48 lower states. Please contact prior to get a shipping quote.We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information.Ebay Promotional Shipping is good for shipments going to 48 lower states only.We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all of our customers.Shipping charges are non-refundable.We will gladly combine shipping charges to one charged based on the total weight of the package. ORCPayment & ReturnWe require that all payments be paid through PayPal. Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted. Per our return policy this item can be returned in 30 days, buyer is responsible for the return shipping, 20% restocking fee may apply.International Buyers, please contact us before bidding to discuss the shipping cost.We always look to satisfy our customers in whatever needs they may have. If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question. If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question.

Price: 616.49 USD

Location: San Diego, California

End Time: 2025-01-20T18:59:11.000Z

Shipping Cost: 0 USD