The Tatting Toolbox: The Empress - 3D Printed Tatting Shuttle Tote

Description: The Tatting Toolbox - 3D Printed Shuttle & Needle Caddy and Tool Tote Keep your tatting tools handy and organized on the go or at home, with this sturdy, compact mini-tote. The Tatting Toolbox is available in three models with slots and features to securely accommodate all your favorite shuttles, tatting needles, and accessories.The Tatting Toolbox features a rigid PLA plastic base with molded-in, tapered shuttle slots that set shuttles on their edges instead of their tips to prevent dulling, blunting, and bending. Slots of different shapes and sizes allow for carrying whatever combination of shuttles and tools fit your current project needs. The oval slots can hold scissors, needle cases, and other tools, while the small circular slots fit a full set of tatting needles of different sizes as well as crochet hooks.The lid opens at the top into two halves like a clamshell, with both halves resting against the sides of the base to form two small shelves when open. Two small tabs on each lid prevent them from closing too far, and magnets* built into the handles securely hold the lid closed. Easily open the lid by pressing outward on the kiss lock style tabs at the tops of the handles.The lid also has enough room for small tatting projects in progress and a ball of thread on top of the shuttles. Standard Lisbeth thread balls fit comfortably inside the lid when closed.ModelsThe Lark’s Head is the standard model, while the Mignonette and the Empress include additional features. The Mignonette adds rings to either side of the case for easy conversion into a purse, while the Empress includes both the rings and a slide-on, magnet-secured compartment on the base of the toolbox body for larger tools and work in progress. Purse straps are not included with the Tatting Toolbox.Tatting Toolbox slots4 small shuttle slots (up to 1/2″ x 3/4″ or 13mm x 19mm)4 medium shuttle slots (up to 9/16″ x 7/8″ or 19mm x 23mm)2 large shuttle slots (up to 7/8″ x 1 5/16″ or 22mm x 34mm)Picot gauge slots (two slots, one sized for the Handy Hands ruler gauge)6 crochet hooks, or tatting needles (up to 1/8″ or 3mm in diameter)1 2/3-depth oval slot for needle cases and smaller scissors1 full-depth oval slot for longer scissorsIf you would like a different slot assortment, please message me to discuss a custom toolbox to fit your needs.Please note that my logo is located on the narrow panel on either side of the toolbox. If you would like your own logo, a convention logo, or other design debossed into the base, please message me for details.These cases are printed in high quality, eco-friendly, industrially compostable PLA plastic. Please remove all belongings, any strap rings, the magnets in the lid handles, and the magnets in Empress bases and slide-on compartments before composting.* Keep magnets away from sensitive electronics and medical devices including pacemakers.Color optionsColor gallery at shop.stephaniecervi.design/pages/3d-printing-color-gallery.I’m not picky: Whatever’s currently loaded in my 3D printer when you order it. Could be any color, or stripes of multiple colors.Custom: Any PLA filament color currently available, but this may delay deliveryFactory Seconds: Toolboxes that are fully functional but have some cosmetic flaws (burbles or globs in the finish, significant discoloration, layer shifting, a cat hair got stuck in it, etc). They work as intended, but are less attractive. I don't intentionally produce lower-quality products, so these will only be "in stock" when there is a printing issue.StandardBlackDark grayLight grayWhitePinkMagentaRedDark redOrangeYellowLight greenMedium GreenDark greenTealLight blueElectric blueRoyal blueStone blueLavenderRoyal purpleLight brownDark brownPremiumCopperSilverGoldCookies & Cream: white with black flecksBlack-white ombre: ombre colors shift between colors as you turn the pieceTeal-yellow ombreRed-yellow ombreNavy-red ombreOrange-black ombreBlue-sky ombre Keep your tatting tools handy and organized on the go or at home, with this sturdy, compact mini-tote. The Empress has several slots and features to securely accommodate all your favorite shuttles, tatting needles, and accessories. The Tatting Toolbox features a rigid PLA plastic base with molded-in, tapered shuttle slots that set shuttles on their edges instead of their tips to prevent dulling, blunting, and bending. Slots of different shapes and sizes allow for carrying whatever combination of shuttles and tools fit your current project needs. The oval slots can hold scissors, needle cases, and other tools, while the small circular slots fit a full set of tatting needles of different sizes as well as crochet hooks. The lid opens at the top into two halves like a clamshell, with both halves resting against the sides of the base to form two small shelves when open. Two small tabs on each lid prevent them from closing too far, and magnets* built into the handles securely hold the lid closed. Easily open the lid by pressing outward on the kiss lock style tabs at the tops of the handles. The lid also has enough room for small tatting projects in progress and a ball of thread on top of the shuttles. Standard Lisbeth thread balls fit comfortably inside the lid when closed.The Empress slots and compartments The Empress has rings on either side of the case for easy conversion into a purse, as well as a slide-on, magnet-secured compartment on the base of the toolbox body for larger tools and work in progress. Purse straps are not included with the Tatting Toolbox. 4 small shuttle slots (up to 1/2" x 3/4" or 13mm x 19mm) 4 medium shuttle slots (up to 9/16" x 7/8" or 19mm x 23mm) 2 large shuttle slots (up to 7/8" x 1 5/16" or 22mm x 34mm) Picot gauge slots (two slots, one sized for the Handy Hands ruler gauge) 6 crochet hooks, or tatting needles (up to 1/8" or 3mm in diameter) 1 2/3-depth oval slot for needle cases and smaller scissors 1 full-depth oval slot for longer scissors 1 slide-off storage tray If you would like a different slot assortment, please message me to discuss a custom toolbox to fit your needs. Please note that my logo is located on the narrow panel on either side of the toolbox. If you would like your own logo, a convention logo, or other design debossed into the base, please message me for details. These cases are printed in high quality, eco-friendly, industrially compostable PLA plastic. Please remove all belongings, any strap rings, the magnets in the lid handles, and the magnets in Empress bases and slide-on compartments before composting. * Keep magnets away from sensitive electronics and medical devices including pacemakers.Color options Click here for a gallery of available colors. I'm not picky: Whatever's currently loaded in my 3D printer when you order it. Could be any color, or stripes of multiple colors. Custom: Any PLA filament color currently available, but this may delay deliveryStandard Black Dark grayMedium gray Light gray White Pink Magenta Red Dark red Orange Yellow Mint Medium Green Dark green Turquoise Light blue Electric blue Royal blue Stone blue Lavender Royal purple Light brown Dark brown Premium Copper Silver GoldSpeckled black: black with white flecks Speckled white: white with black flecksFeatured Patterns “Interwoven Picot Medallion” by Cajah Reed “Lace Day Earring” by Muskaan “Dazzling Debut” by Marilee Rockley “Rosemarie’s Heart” by Rosemarie Peel “Heart’s Desire” by Sue Fuller “Mat Motif” by Melanie Cervi

Price: 68 USD

Location: Monterey, California

End Time: 2025-01-08T01:51:34.000Z

Shipping Cost: N/A USD