Description: Here is a Tang Band W2-835SH Line Array Module-Price is EachWe made these for Pro Audio 2-way Line Loudspeakers. The module is 1/8" aluminum. The speaker mounting holes are drilled and tapped for 4-40 screws. If you want a slight curve to your desogn it can be slightly curved. We didn't use it that way. Ours was flat. Electronic Crossover (DSP) is recommended because a shelf is required at around 3Khz. This is due to the mutual coupling of the drivers below 3Khz. This is a function of the driver size. These are Mid-High Frequency Sections although for a speech reinforcement sound system no low frequency section would be required. We electronically crossed these at 300Hz. These speakers have a high frequency response that extends to over 20Khz, see data sheet. With normal program material this line array module can be used with 600 watt amplifiers. The foam around the edges might have to be cleaned off.Tang Band Loudspeakers are known as a premier brand loudspeaker manufacturer. https://www.tb-speaker.com/products/w2-852sh Check Out my other items
Price: 399.99 USD
Location: North Versailles, Pennsylvania
End Time: 2025-01-28T15:43:56.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Tang band
Driver Size: 2 in
Type: Vertical Line-Array Loudspeaker
Manufacturer: Tang Band
Model: W2-852SH
Connectivity: Wired
Impedance: 4 Ohms
Unit Quantity: 1x Loudspeaker Assembly, 32 Drivers
RMS Power: 256
