Tactical Modular Plate Carrier MOLLE vest Corsair M3c

Description: Tactical Modular Plate Carrier MOLLE vest "Corsair M3c" Threat level rating: No (soft inserts are absent)Manufacturer: TempModel: "Corsair M3c" Type: VestThe vest is equipped with MOLLY Condition: used *The color tone may vary slightly from the photographs in this listing. The vest "Corsair M3c" is designed for heavy use, even in hot climates: when the waist fasteners are set slightly loose, the vest balances on the wearer?s torso allowing breathing room between the plate carrier and the wearer?s skin. Loose wearing of the vest is not advisable during combat, but having the option prevents the need for removal of the vest to cool down during non-combat. The front and back of the vest have full-size pockets, exterior to the Kevlar ?IIIA Soft Armor?, which are hard armor plate ready. Adding hard armor to the vest would increase its front and rear ballistic rating to 3 or 4 (depending on the plates you choose to add). *Hard armor plates and soft kevlar inserts are not included in this auction. On the entire surface of the bulletproof vest is outfitted with 25mm belt strapping at an alternating interval of 25mm to comply with the MOLLE (MOLLY) standard, on which items of equipment and ammunition can be attached (pockets and gear). All straps lines MOLLE vest have the same color in the color of the vest. What makes 100% draining the terrain. Belt tape is manufactured according to TU U 13.2-31778043-115: 2015 on polyamide yarn, has maximum breaking loads. The vest "Corsair M3c" is a modular system and can completely disassemble. Made of a very robust and high-strength quality fabric (high-strength polyamide fabric "SCC-36," "TPS-12"). 1. Completion of the vests "Corsair M3c" can be supplemented with hard armor plates and soft inserts (at an additional cost).2. The fastening of the left and right axle shafts of the side protection in sides has a double fixation with a textile fastener. Length of side wings adjustable.3. From the back on the top of the vest is rigidly fixed the evacuation line.4. In the side compartments, also and rigid armor plates can be placed.5. The left and right side elements of the body armor are protected by the MOLLE system from the back, this fastening allows you to adjust the vest at the waist. This allows you to wear a vest like in summer on a T-shirt and in winter on a warm volumetric jacket.6. The groin protection element is fastened with belt strips to the MOLLE slings located on the bottom of the chest cover.7. Pockets for armored plates. The size is M (Medium) 25x30 cm / 9,84'x11.81'.8. On the front side of the vest has 6 rows of MOLLE sling lines, for which you can install all necessary pouches, Mags, pockets for documents, a flashlight, walkie-talkie and other ammunition. All these pouches you can also buy in our Ebay-shop or on request if something you can not find on our page. For additional cost the body armor can be completed:- armor plates in accordance with the standard of Ukraine (DSTU) or the US standard. The hard armor plates are located in the extra pockets of the body armor vest.- soft inserts If you have further questions or other ideas of a trade, feel free to send me messages! If you have any questions, please ask, do not hesitate.So welcome to buy my lot. Enjoy your shopping, I still have a lot of other products of military and sporting themes.6

Price: 120 USD

Location: Kyiv, default

End Time: 2024-09-03T15:07:30.000Z

Shipping Cost: 35 USD