La Milano

Strymon Cloudburst Ambient Reverb Pedal (Demo Deal)

Description: Category 500 Series Modular Synth Keyboards Microphones Preamps Dynamics Equalizers Monitoring Computer Audio Interfaces Software Beat Production Based on the beloved “Cloud” algorithm from the best-selling Strymon BigSky reverb pedal, the Strymon Cloudburst Ambient Reverb wraps your tone in soft, flattering reverb that never sounds harsh or hollow. It may be half the size of Strymon’s other pedals, but this little blue box dishes up huge, lush sounds thanks to its advanced ARM processor, unique Ensemble effect, full stereo compatibility, and flexible expression pedal and MIDI control options. With just five knobs, dialing in sounds is quick and intuitive. Adjust the reverb tail from 1-50 seconds with the Decay knob, add Predelay for rhythmic playing, fine-tune the treble with the Tone control, adjust the modulation depth and speed with a single Mod knob, and dial in the perfect blend of reverb with the nonlinear Mix control. Ensemble mode analyzes your input signal and adds musical harmonics to the reverb, resulting in a swelling string pad-like sound with two settings: mp for subtle harmonic richness and forte for a more pronounced effect. On the rear panel, the routing switch features settings for mono, mono-to-stereo, and full stereo modes, while the convenient TRS I/O jacks carry the left and right channels on a single cable each. The expression input accepts a standard continuous-sweep expression pedal for controlling any of the main parameters, while connecting a Strymon MiniSwitch or MultiSwitch gives you access to Freeze and Infinite modes, providing static or responsive ambient reverb pads to play over. With support MIDI-over-TRS and a USB-C port for firmware updates and preset management, there’s a lot to explore in this small but mighty reverb engine. SOUND DESIGN DESIGN CONCEPT With Cloudburst, Strymon had some very high goals in mind. Foremost was creating the best sounding single reverb algorithm they possibly could. They knew that at high decay settings, they wanted to provide the spacious experiences that are available from BigSky’s Cloud algorithm, and then set about tailoring the short end of the decay range to generate a huge variety of natural sounding, studio quality smaller spaces. Second, Strymon wanted to provide a whole new variety of sounds never before heard from a reverb pedal with the addition of Strymon's new Ensemble effect. This effect’s design ensures a seamless, natural, and artifact-free interaction with the reverb and with your guitar signal. With the Ensemble switch in its mezzo piano (or “moderately soft”) position, it can subtly enhance the character of the reverberated signal, while in its forte setting, it can yield huge string ensemble effects reminiscent of vintage polyphonic string machine synthesizers. Finally, Strymon wanted to create a pedal that was the most simple and intuitive to use of any product they'd ever designed. So with Cloudburst, there are no secondary or “hidden” functions. The pedal is controlled by just a few knobs and a switch exactly as they are labeled, so you can instantly dial up the perfect sound with no learning curve required. DECAY The Decay knob on Cloudburst does some seriously heavy lifting. Not only does it control the duration of the reverb tail, but it also dramatically transforms the character of the reverb via numerous continuous under-the-hood adjustments, allowing you to discover countless new musical and inspiring sounds at different points all along the dial. Even tiny adjustments of this knob can yield noticeable changes to the character of the reverb. ENSEMBLE Coudburst’s Ensemble effect works by continuously analyzing 48 different frequency bands from your input signal, and generating upper harmonic partials of what it finds in each frequency band as you play. Rather than generating a static, synthetic signal based on pitch detection, Ensemble is a dynamic, organic effect that generates harmonics based on your playing and that varies its sonic character depending on real time factors like where you pick, which pickup you use, and the volume envelope of what you play. The result is a gorgeous string ensemble-like expansion of your reverberated signal that creates a unique and unforgettable playing and listening experience. MIX Controls the reverb mix from full dry at minimum to full wet at maximum. A 50/50 mix occurs at approximately 3 o’clock on the knob. Additional power-up options allow for kill-dry (for use in effects loops) as well as an analog dry path option. Use moderate mix settings and darker tone settings combined with short decay times to create a variety of realistic small spaces, or soar through huge ambient cloudscapes with liberal mix settings and high decay times.  PRE-DELAY Pre-delay lets you add space between your dry signal and reverb — a handy tool for maintaining clarity when using higher Mix and Decay settings. Also useful for creating swells or blooms after notes or chords. With short decay times, Cloudburst’s pre-delay can be used to create reverberant slap-back echoes. TONE Controls the amount of high frequencies within the reverb, with a damped high end at minimum to no damping at maximum. Set the Decay knob to tailor the sound of your reverb, or control it with an expression pedal to create dramatic effects in combination with long Decay times and Ensemble. MODULATION There is a certain magic to the lush effects that can be created by modulating the lengths of the individual delay lines responsible for the reflections in a reverb tank. Cloudburst’s MOD control can take this a few steps further, especially when used together with Ensemble, where high MOD settings can create a fast, synth-like vintage science fiction pitch modulation. MIDI Cloudburst features full MIDI implementation, allowing you to control pedal parameters remotely by sending MIDI commands from your controller or DAW via Cloudburst’s EXP/MIDI jack or USB-C connection. 300 MIDI preset locations are available for loading and saving your favorite settings. Remotely bypass or engage the pedal, automate decay time or other knob adjustments in your DAW, recall unique presets for each song on your setlist — the possibilities with MIDI are limitless. TRUE & BUFFERED BYPASS Cloudburst lets you choose electromechanical relay switched true bypass for a 100% untouched, unprocessed signal when the pedal is bypassed (this is the default setting), or you can opt for premium quality buffered bypass that conditions your signal to preserve its integrity by preventing the high end roll-off that can happen due to longer cable runs. JFET INPUT Uncompromised dynamics and feel. Exceptional touch sensitivity and responsiveness. Cloudburst feels just as good as it sounds, thanks to a high impedance ultra-low noise discrete Class A JFET preamp input.  STEREO IN AND OUT No need to make compromises when it comes to signal routing or pedal placement — Cloudburst is a stereo reverb pedal with full stereo in/out capabilities.  A single TRS input jack allows Cloudburst to keep its compact form factor while giving you the option to use a stereo input signal. A dedicated rear panel Input switch allows you to easily set Cloudburst for operation with a stereo (TRS) or mono (standard TS) input source. A single low impedance TRS output jack lets you use Cloudburst as a stereo effect with a TRS cable, or mono with a TS cable. POWERFUL ARM PROCESSOR Significant developments in mobile phones and computers have led to an evolution in technology that now allows Strymon pedals to perform more simultaneous processes with less power draw than ever before. That means more processing power for every sonic nuance with less power consumption on your pedal board. CONTROLS & ROUTING DECAY: Controls the duration of the reverberated signal’s decay. Lower settings reduce the size of the reverberated space ENSEMBLE: Sets the amount of ensemble harmonics added to the reverb input MIX: Controls the reverb mix from full dry at minimum to full wet at maximum. A 50/50 mix occurs at approximately 3 o’clock on the knob. Additional power-up options allow for kill-dry (for use in effects loops) as well as an analog dry path option. PRE-DELAY: Sets the amount of time before the reverberated signal appears. For most natural results, use lower MIX settings when using higher PRE-DELAY TONE: Adjusts the high-end content of the reverb. Lower settings create darker, warmer reverberation. Higher settings are bright and crisp. NOTE: Also affects the presence of the ENSEMBLE effect. MOD: Controls the modulation of the reverb delay lines to create a variety of  lush effects. Turning the knob clockwise from minimum increases modulation depth for the first half of the knob’s range. Continuing to turn the knob past its halfway point increases the speed of the modulation. FOOTSWITCH: Engages and bypasses effect. RED LED indicates the effect is engaged. I/O MODE SELECTOR: mono (mono input, mono output); mono stereo (mono input, stereo output); stereo (stereo input, stereo output) - note: Stereo operation requires a TRS adapter or cable IN: High impedance, ultra low-noise, discrete Class A JFET preamp input. TRS adapter cable required for stereo input signal OUTPUTS: Low impedance stereo TRS output. Use TS for mono output or TRS for stereo output EXP/MIDI: Multifunction communication jack for external control of Cloudburst’s features and functions. Use a standard TRS expression pedal for continuous control over the knobs of the pedal (default setting). Can be set to operate in one of five modes: Expression Pedal, Favorite, Freeze, Infinite, or MIDI Mode. See User Manual for details USB-C: Computer connection for controlling via MIDI and for performing firmware updates 9VDC: Use the included power supply or an adapter with the following rating: 9VDC, center negative, 250mA minimum About Us Since 1993, we have been committed to equipping our customers with the very best gear, advice, and personal service anywhere. We believe that great sound can be achieved at any budget. We also believe that the ambitions of our customers should always come first. For us, it's about building long-lasting relationships, not just selling gear. And over the years, those beliefs have turned customers into friends and family. Whether you're just starting out, or a seasoned pro, we're here for you, no matter where your audio travels may take you. Shipping Policy Free ground shipping to the lower 48 states Via FedEx. All of our items ship via FedEx. On checkout, it may look like you are selecting a UPS shipping method, but the item will be shipped via the equivalent FedEx method. Import Duties and Tax Since import taxes and/or duties that your government might impose on products shipped from the United States may apply, you (the customer), are solely responsible for shipping charges, taxes, and duties, once goods arrive in your country. Undeliverable/Rejected Package If your package was rejected by your local Customs Bureau or the shipment could not be delivered and was returned to Vintage King Audio for any reason, we are not responsible for the shipping costs. Free Extended Warranty All new items that Vintage King carries are subject to our FREE extended warranty protection. Basically, if the manufacturer offers a 1-year warranty on your product, then you are covered under the same warranty terms for a total of 2 years from the time of initial shipment. Likewise, if the manufacturer offers a 5-year warranty, then you receive a total of 6 years of coverage when purchased through Vintage King. We add 1 year to your standard manufacturer's warranty period, FREE of charge, whatever the manufacturer's warranty period may be. Duties and tax for warranty and damage replacement items International Duties and tax for warranty and damage replacement items may apply. Even though you may have paid shipping, taxes or duty on your original order, it is IMPORTANT to understand that your government may impose duties and taxes for warranty items or replacement items damaged during shipment from the United States for the new order. You (the customer), are solely responsible for shipping charges, taxes, and duties, once goods arrive in your country. Used Item Warranties Vintage King offers an industry-leading level of technical service and warranty support on our used and vintage items. Our used item warranty periods are as follows: Analog Outboard Gear 1 Year Microphones 1 Year (excluding capsules, tubes, and ribbon elements) Speakers 1 Year (excluding drivers) Digital Outboard Gear 30 Days Return Policy We do our best to help you choose the perfect gear, but if you don't love it in the first 30 days after receipt, please contact us through eBay for a return authorization. Note: Software is not returnable or refundable. What Are "Demo Deal" or "B-Stock" Products? Our Demo Deals and B-Stock products offer a unique opportunity to save big on near-mint condition, fully warrantied gear. These items have been opened for demonstration purposes and put back in the box without extended use. All original factory accessories and packaging are included. In addition to the manufacturer's warranty, Demo Deal and B-Stock items also come with an additional 1-year of warranty coverage from Vintage King, free of charge, so rest assured that not only are you saving big by purchasing a Demo Deal/B-Stock item, but you will also receive the same level of world-class support from Vintage King as with the purchase of a factory-sealed unit. Taxes Vintage King collects sales tax for shipments to Alabama, Arkansas, Arizona, California, Colorado, Connecticut, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Nebraska, Nevada, New Jersey, New Mexico, New York, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Utah, Vermont, Virginia, Washington, Washington D.C., Wisconsin and Wyoming. Partial and complete tax exemptions may be available in your state. Contact us through eBay for details. Note: eBay may collect sales tax in states not listed above.

Price: 249 USD

Location: Ferndale, Michigan

End Time: 2024-08-15T16:13:38.000Z

Shipping Cost: 5 USD

Product Images

Strymon Cloudburst Ambient Reverb Pedal (Demo Deal)Strymon Cloudburst Ambient Reverb Pedal (Demo Deal)Strymon Cloudburst Ambient Reverb Pedal (Demo Deal)

Item Specifics

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Return policy details:

MPN Value DEFAULT:Does Not: Z120-CLOUD

Brand List: Strymon

Type: Reverb

Brand: Strymon

Model: Cloudburst

UPC: Does Not Apply

MPN: Z120-CLOUD

Recommended

Used Strymon Cloudburst
Used Strymon Cloudburst

$239.00

View Details
Styrmon BigSky Reverb Effects Pedal
Styrmon BigSky Reverb Effects Pedal

$479.00

View Details
strymon blue sky v2
strymon blue sky v2

$325.00

View Details
Strymon Next Gen Deco
Strymon Next Gen Deco

$379.00

View Details
Strymon Riverside Multistage Drive Pedal
Strymon Riverside Multistage Drive Pedal

$299.00

View Details
Strymon power supply
Strymon power supply

$15.00

View Details
Strymon UltraViolet Vibe Pedal
Strymon UltraViolet Vibe Pedal

$259.00

View Details
New Strymon Riverside Multistage Drive Guitar Effects Pedal
New Strymon Riverside Multistage Drive Guitar Effects Pedal

$299.00

View Details
USED Strymon Mobius (010)
USED Strymon Mobius (010)

$297.49

View Details
Strymon Ojai High Current 5 Output Pedal Power Supply Expansion Kit
Strymon Ojai High Current 5 Output Pedal Power Supply Expansion Kit

$149.00

View Details