STEPPERONLINE Nema 34 Stepper Motor 680oz.in 6A L=80mm & Driver DM860I CNC Kit

Description: This CNC kit included: 1 x DM860I: Digital Stepper Driver 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Drive 1 x 34HS31-6004S: Nema 34 Stepper Motor Bipolar 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x80mm 4 Wires Motor Specification Manufacturer Part Number: 34HS31-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 4.8Nm(679.74oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.42 ohms± 10% Inductance: 3.8mH±20%(1KHz) Frame Size: 86 x 86mm Body Length: 80mm Shaft Diameter: Φ14mm Shaft Length: 37mm Keyway Shaft Length: 25mm Number of Leads: 4 Lead Length: 500mm Driver Specification Output Peak Current: 2.4~7.2A(6.0RMS) Input Voltage: +20~80VDC Logic Signal Current: 7~16mA(Typical 10mA) Pulse Input Frequency: 0~200kHz Pulse Width: 2.5μS Isolation Resistance: 100MΩ Support PUL/DIR and CW/CCW modes Automatic idle-current reduction Suitable for 2-phase and 4-phase motors Soft-start with no "jump" when powered on Over-voltage, over-curren protection Anti-Resonance provides optimal torque and nulls mid-range instability Pulse input frequency up to 200KHz, TTL compatible and optically isolated input 8 selectable peak current including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors 16 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000 Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement, works well as Cnc drive as well. Connection A+ A- B+ B- Black Green Red Blue On Mar 28, 2024 at 20:08:15 PDT, seller added the following information:

Price: 75 USD

Location: Perth Amboy, New Jersey

End Time: 2024-09-29T03:01:02.000Z

Shipping Cost: 0 USD