Stator for Ducati Sport Touring ST2 ST3 ST4 | Monster S4 S4R 1999-2007 26440181A

Description: Free shipping in USA Same day shipping visit our store > find parts for : ATV / UTV / SXS Motorcycles Snowmobiles Watercraft Other Menu Store Home find parts for ATV / UTV / SXS Motorcycles Snowmobiles Watercraft Other IMPORTANT - Important notice about the product.--> Generator Stator for Ducati Sport Touring ST2 / ST3 / ST4 / ST4S | Monster S4 / S4R 1999-2007 | OEM# 26440181A KEY FEATURES Brand new aftermarket generator stator Plug-and-play unit, direct fit, easy to install Highest grade of copper winding, resistant to 200 degrees Celsius Direct replacement to your original unit All products shipped are tested DESCRIPTION Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY ! Brand new aftermarket generator stator Direct replacement to your original unit Plug-and-play, direct fit, easy installation Highest grade of lamination materials Highest grade of copper winding, resistant to 200 degrees Celsius Connector included Rubber grommet included All products shipped are tested We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause for repetitive electrical issues. All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part. PAcked with these technologies --> Vehicle models fitment Ducati Monster S4 -- 2001-2003Ducati Monster S4R 1000 -- 2003-2006Ducati ST2 Sport Touring -- 1999-2003Ducati ST3 Sport Touring -- 2005-2007Ducati ST4 Sport Touring -- 1999-2003Ducati ST4S Sport Touring -- 2001-2005 OEM part replacement 26440181A26440182A26440183A26420184A Specifications Dimensions : Interior diameter : 42 mm Exterior diameter : 106 mm Thickness : 25 mm Length of wires stator to grommet : 180 mm Length of wires grommet to plug : 850 mm Other specifications : Number of wires : 3 Number of plugs : 1 Number of pins : 3 Wire to wire resistance : Alternator : Between each Yellow = 0.4 ohms +-20% instructions Before installing your new stator Check the AC output of the stator Replace any burned or corroded connectors on stator and regulator rectifier Check and repair any melted wiring Use hi-temp dielectric grease on all connectors Our stator may use a different wire color code than your original. All the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010". Warning: Risk of electric shock. Disconnect the battery before servicing. Ensure proper installation by a qualified technician to avoid malfunction. SHIPPING We deliver 99.4% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period. If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes. Videos Racetech around the world --> customer service AsK seller a question duties & taxes International Buyers: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. RaceTech Electric was founded in 2011 by three motorcycle industry veterans in San Diego, CA. The group has over 20 years combined in the Motorcycle industry. Customer servicePart request About usAbout seller pageAdd seller to favorite

Price: 149 USD

Location: Dover, New Jersey

End Time: 2025-02-04T18:39:30.000Z

Shipping Cost: 0 USD