Description: Genuine Stanadyne Drive Shaft Seal Install Tool 22727This tool is used to slip the seals over the drive shaft with easeNOTE: This tool does not work with drive shaft that are held in by clips, please see third Photo For installing seal number (10453) onto the drive shaft If you need the tool to put the seals into the housing see item: 1539108943778007367440dieselitems NOTE: With all Stanadyne / Roosa Master Pumps, it is a good practice to tie the throttle lever in Wide Open position anytime the pump is going to be off the engine.M – F 7:30 - 4:30 CT"Jason will be your pump man if you let him"From a Customer who Found Us on Ebay: "Just a note to let you know that the injector pump that you re-built for me works like brand new. If there is anyone here that needs one re-built I will tell them you are THE BEST IN THE COUNTRY". Thank You so much Ken - AZ I rebuild and set these pumps for a living, and have been doing so for 33 years, If you would like to send me your pump to be rebuilt, contact me. Most of the pumps that use this tool will run about $395.00 to be rebuilt. We can also check and clean your injectors for free, so send them along as well. After checking your injectors, we can give a quote if any fail testing. Here are some of things that can effect the price:Pump is locked up and/or the main drive shaft is broke.Engine will not start when warm, after sitting from 1-60 minutes. But does start when cool. This may indicates a bad head and rotor.Cam ring in pump is worn, requires inspection during tear down.Pump has excessive rust and corrosion.Housing is damage or unusable. Here is how it works:Contact me with your pumps Models numbers.I will try to give you a closer estimate based on the problems you describe.Pump must not have been taken apart.Pump must be drained of all fuel as shipping service may return or destroy packages that leak fuel.You ship your pump to me pre-paid. (Packaged well, I can not be responsible for items damaged in shipment)We check the pump and contact you with a full estimate, return shipping cost and time you should expect your pump back. (Normal times are a week to 10 days).If you choose not to have your pump rebuilt after the estimate, all you pay is freight back to you. Why would you want to do this?Pump will be cleaned, inspected, rebuilt, tested and will look and run great.All fully rebuilt units are invoiced and include a 6 months warranty.We will provide tips for reinstalling as well as some of the parts you may need to do so.We have access to parts, specifications and test equipment to make sure your pump is right.Remember the call is free, the service is great and my knowledge base covers over 33 years. DC pumps are higherPayment for rebuilt pumps must be paypal or Credit Card before we can ship the pump back to you, Thanks.
Price: 39.99 USD
Location: Huntsville, Alabama
End Time: 2023-11-15T22:07:24.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Country/Region of Manufacture: United States
Manufacturer Part Number: 22727
Modified Item: No
Custom Bundle: No
Other Part Number: 10453
Non-Domestic Product: No
Brand: Stanadyne
