Speakercraft AIM7 SR Three Series-2 Speaker (NIB)

Description: You will receive (1) Speakercraft AIM7 SR Three Series-2 Speaker. A new twist on surround sound from an in-ceiling speaker The Speakercraft AIM7 SR Three Series 2 (or AIM273SR, for short) is a top-notch in-ceiling speaker, designed specifically for reproducing realistic surround effects in your home theater system. Its four-tweeter array has a special twisted design that offers a wider dispersion pattern for the atmospheric effects that make movie-watching a truly immersive experience. The speaker also handles a muscular 125 watts and delivers low-end response down to 40 Hz. It's a perfect choice for high-performance surround sound from speakers you'll barely even see. Aim sound where you need it most It's called the AIM273SR for a reason this speaker lets you aim sound for the perfect surround experience. The 7" aluminum woofer tilts up to 15 degrees each way, and each of the four 5/8" aluminum tweeters built into the ARC Tweeter Array can rotate and tilt. That means you can mount the speaker where it looks best, or where it has proper support, and then direct the sound waves as needed for the best coverage in your home theater. WavePlane technology helps further focus high-frequency sound dispersion, providing maximum clarity. Product Research, Features: Surround In-Ceiling Speakers:This SpeakerCraft in-ceiling speaker has been designed to serve as a side or rear speaker for sophisticated home theater applications, including Dolby Digital, DTS, Dolby Atmos, Auro-3D, and DTS:X. ARC Tweeter Array:By incorporating four 0.625" aluminum dome tweeters in a line array, the AIM Series 2 in-ceiling speaker delivers focused high frequencies farther into the listening area than standard tweeter configurations. The ARC Tweeter Array lowers the crossover point to increase the sound pressure level at the critical mid-range frequencies so that acoustically, listeners enjoy a much larger sweet spot. WavePlane Technology:Complementing the ARC Tweeter Array is SpeakerCraft's updated WavePlane technology that acts as an acoustic lens, focusing the high frequency audio energy into the listening environment for a cleaner, wider, and richer sound. Ordinary speakers only sound their best when you are directly underneath them, but the WavePlane assures optimal high frequency dispersion throughout the listening area. 7" Woofer:The SpeakerCraft in-ceiling speaker houses a 7" aluminum cone woofer with a butyl elastomer surround for midrange and midbass frequencies. Aim-Ability:The enhanced aim-ability of the AIM Series 2 in-ceiling speaker provides flexibility for installation in home theater and whole home audio applications, so you can aim the sound exactly where you want it. The speaker housing design allows for a +/-15pivoting woofer, totaling 30of adjustment. Once the woofer is positioned, you can pivot and rotate the ARC Tweeter Array and WavePlane to further adjust the direction of the sound into the room toward the listening area. The ARC Tweeter Array and WavePlane rotate as one unit up to 359. You may also further pivot the ARC Tweeter Array an additional 12. Acoustic Compensation Switches:The SpeakerCraft in-ceiling speaker employs two acoustic compensation switches to adjust treble frequencies and sound dispersion. Treble Adjustment Switch:The switch labeled "Treble" allows for 6dB of tweeter adjustment. The factory setting is set at 0dB (neutral) of treble. If you desire less treble, slide the switch to the "- position" for -3dB of treble; if you desire additional treble, slide the switch to the "+ position" for +3dB of treble. Surround Adjustment Switch:The switch labeled "Surround" allows for a more diffused sound or more direct sound to be created from the speaker. Use the "< >" (Diffuse) setting when using the speaker as a side effects loudspeaker or use the "> <" (Direct) setting when using the speaker as a rear effects loudspeaker. Vortex Eliminators:The AIM 2 in-ceiling speaker's Vortex Eliminators disperse sound as it reaches the outer edge of the speaker baffle. Acoustically, this moves the speaker closer to the surface of the ceiling, improving the overall dispersion of sound and eliminating any tunnel effect found in ordinary ceiling speakers. Speaker Terminals:The SpeakerCraft in-ceiling speaker is fitted with spring-post speaker terminals that will accommodate bare wire (up to 12AWG), pin-connectors, and banana plugs (single or dual). Paintable Grille:The in-ceiling speaker comes with a perforated metal grill finished in white. It can be painted to match the color of your ceiling. In-Ceiling Installation:Its round shape and low-profile speaker grille allow the AIM Series 2 in-ceiling speaker to mimic the look of a recessed lighting fixture. The speaker requires a cutout of 8.4375" and a mounting depth of 5.5". The speaker frame has a diameter of 9.625". Once the hole is cut, the speaker can be dropped in and the rotating cams can be tightened, allowing you to secure the speaker to the drywall without any extra assembly. Product highlights: 7" aluminum cone woofer15 pivoting ability ARC Tweeter Array incorporates four 5/8" aluminum tweeters each tweeter features 15 pivoting & 359 rotational ability tweeter housing design is optimized for wider dispersion of surround effects acoustic isolation technology minimizes transfer of acoustic energy to mounting and surrounding surfaces front-mounted switch allows 3dB of treble adjustment timbre-matched to all Three series speakers handles 150 watts RMS frequency response: 40-20,000 Hz sensitivity: 89 dB impedance: 8 ohms 9-5/8" diameter x 5-1/2" deep cutout diameter: 8-1/4"

Price: 174.95 USD

Location: Scandia, Minnesota

End Time: 2024-09-06T04:21:24.000Z

Shipping Cost: N/A USD