Description: SOFT START LCD: PCB. Uin 24-250V AC, Imax 32A. The DEVICES mainly serves to suppress current peaks when switching on the appliance, which after connecting to the 24V-250V AC mains has a low input resistance, which causes disconnection of the circuit breaker or interruption of the fuse. For example for transformers, resistive loads, inductive loads: pumps, compressors, single-phase motors - it can have a smooth start-up effect, but it depends on its load, but it may not be visible. (Attention does not replace the frequency converter!) When setting in practice, it is necessary to first set the min / max time. After connection, the green LED3=5V is ok. After 2 seconds, the yellow LED2 turns on = the triac switched at zero connected the NTC to the output and after a set time of 2s-5s with the trimmer R15, the relay turns on, which bridges the NTC = full power. (this prevents unnecessary NTC overheating) SIZE of PCBs: 140 x 98 x 40 mm or 5.5 x 3.85 x 1.58 inch. Service and repair is possible directly with me as in the manufacturer. Burned pcb or mechanically damaged pcb is no longer repaired. CAUTION for soft start connection! It connects between the switch and the appliance! Warning: The product is galvanically connected to a AC power supply!
Price: 55 USD
Location: Nove Mesto nad Vahom
End Time: 2024-09-12T11:05:29.000Z
Shipping Cost: 10 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: START
Model: 32A
MPN: Does Not Apply
Input Voltage: 265 V
Country/Region of Manufacture: Slovakia
Modified Item: No
Rated Load: 10 HP
