SMARTSTANDARD 6.6ft Heavy Duty Sturdy Sliding Barn Door Hardware Kit -Smoothly a

Description: Q: How to ensure the stability and safety of the door?2 Door Stoppers: Two door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and they’re cushioned by rubber caps for a quiet close.1 Floor Guide: A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard.2 Anti-jumpers- those little round discs- go on top of the door and won't allow door to be lifted off rail unless they're turned.Q: When do you need a headboard?a. If the studs don't line up with the pre-drilled holes in the rail.b. If there is a doorway trim.And 'door depth' plus 'trim depth' is greater than 2''Q: How much space do I need above the doorway?A: You will need a minimum of 6" from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly.Q: How thick of a door will this kit work with?A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 3/8" to 1 3/4", but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below:2''- door depth - trim depthIf your answer is 0 or greater, then you're fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board.

Price: 55.99 USD

Location: Dallas, Georgia

End Time: 2023-12-05T18:58:29.000Z

Shipping Cost: 0 USD