Description: SmallRig Full Cage for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 1 / Alpha 7R IV 3667B is designed to provide accessory mounts and protect camera. It lock camera via one bottom locating pin, one 1/4"-20 screw and the one M2.5 screw on the left side. The side lock adapters need to be adjusted the installation direction for fitting different camera types, printed with “A7 IV”is for Alpha 7 IV and Alpha 7R V while printed with “A7S III/A1”is for Alpha 7S III / Alpha 1 / Alpha 7R IV. Built-in all-round protective spacers prevent the camera from being scratched. The cage gives access to interfaces, dials, buttons or battery door. There is a spindle spanner at the battery compartment which fits camera curve and leave room for little finger for comfortable grip. 1/4"-20 threaded holes, ARRI 3/8" -16 locating holes and cold shoe mounts support top handle 2165C, side handle 2093, monitor mount 2903, microphones, LED lights, monitors, etc. Bottom OD socket support QD shoulder strap. Arca-Swiss quick release plate at the bottom is compatible with DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, the quick release plate (riser plate) of DJI RS 2/RSC 2 stabilizer for stabilizer shooting, and Arca-Swiss quick release plate 3154. Optional HDMI Cable Clamp 3000 works with Alpha 7R V / Alpha 7 IV / Alpha 7S III to protect interfaces and ensure stable signal transmission during filming. Holes on the sides and bottom of the cage allow attaching such accessories as hand strap PAC2456 and shoulder strap PSC2428. Besides, the cage comes with a built-in magnetic spanner that facilitate disassembly and assembly. Notes:1. After fixing the 1/4"-20 screw at the bottom of the cage, remove the anti-deflection pin from the staging hole in the battery compartment position and secure it to the corresponding position.2. To use the side lock adapter, please remove the split ring on the left side of the camera first.3. HDMI Cable Clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV cameras and will interfere with the synchroterminal interface when used on Alpha 7R V camera. Compatibility: Sony Alpha 7R VSony Alpha 7 IVSony Alpha 7S IIISony Alpha 1Sony Alpha 7R IV In the Box: 1 x CageProduct Dimensions: 146 x 107.6 x 64.5mmPackage Dimensions: 165 x 155 x 85mmProduct Weight: 180g±5gPackage Weight: 286g±5gMaterial(s): Aluminum Alloy, Stainless Steel, Silicone SmallRig Hand Strap PAC2456 can effectively protect the safety of your camera and enhance the shooting stability to a certain extent when using a camera cage or an external side handgrip for handheld shooting. The width of its nylon webbing is 12mm and will be compatible with camera cage and external side handgrip with strap slot on both upper and lower sides and its width no less than 12mm, such as SmallRig Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K 2203B, SmallRig Aluminum Universal Side Handle HSS2425, and so on. The surface of the hand strap is made of PU material, which makes the strap wear-resisting and durable. It is filled with high-quality EVA material, covered with microfiber fabric, will bring better shock-proof experience and excellent effect of moisture absorption and perspiration, to keep hands dry and comfortable. It supports quick adjustment, which can be quickly tightened without loose with a gentle pull. Note:1. Safety load: 12.5kg2. Do not expose to the sun.3. Wash by hand and dry in a cool and ventilated place. Compatibility:1.Compatible with camera cage and external side handgrip with strap slot on both upper and lower sides and its width no less than 12mm2. Compatible with L-Bracket with strap slot on the lower side and its width no less than 12mm (a camera split ring is required when using with the L-Bracket, and the split ring is not included) Package Includes:1 x Hand strap Product Dimensions: 116 x 48 x 10.5mmPackage Dimensions: 120 x 100 x 40mmNet Weight: 22g±5gPackage Weight: 42g±5gMaterial(s): PU, Microfiber fabric, EVA, Nylon The SmallRig Mini Side Handle (1/4”-20 Screws) 2916 is designed for mirrorless, digital camera, and other small cameras. Two 1/4”-20 screws are fixed to the side of the Cage. The handle supports additional mounting options - The flash and microphone can be mounted through the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off. Highly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. Compatible with SmallRig Cages 2808. Made of aluminum alloy and plasticï¼PC+ABSï¼?with ergonomic design, the portable handle provides filmmakers with smooth and comfortable shooting experience. Note:1. The maximum bearing capacity of the handle is 3.5kg. Please do not overload.2. This handle serves as a mini grip, please kindly check other handles on our website if you prefer larger ones. Compatibility:Any cage featuring two 1/4”-20 threaded holes with 18mm distance on the side.Package Includes:1 x Handle1 x Hex Spanner Product Dimensions:76 x 42 x 100mmPackage Dimensions: 121 x 105 x 45 mmNet Weight: 139g±5gPackage Weight: 178g±5gMaterial(s): Aluminum Alloy, Plastic（PC+ABS） SmallRig ARRI Locating Handle（Lite）3765 is designed to facilitate low-angle shot and reduce burdens on arms. The ergonomic handle, featuring anti-slip and anti-freeze silicone, feels comfortable and weighs only 124g because of a hollowed-out structure. It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories. ARRI 3/8" -16 locating holes support Monitor Mount 2903, 2348 to attach monitors; 1/4 "-20 threaded holes support Magic Arm 2070 for monitors and Remote Control 2924 for recording. An Allen Wrench helps tighten the locking screw, making it easy to assemble and disassemble. Note: Maximum load capacity is 10kg Compatibility:Cages with ARRI 3/8" -16 locating hole In the Box:1 x Top Handle1 x Allen Wrench Product Dimensions: 135 x 24.5 x 74.3mmPackage Dimensions: 156 x 83 x 43mmNet Weight: 124g±5gPackage Weight: 179g±5gMaterial: Aluminum Alloy, Silicone, Stainless Steel SmallRig Swivel and Tilt Adjustable Monitor Mount with Cold Shoe Mount 2905 is designed to hold your monitor for easy monitoring. It comes with a bottom cold shoe for camera hot shoe, cage or handle and a top 1/4"-20 screw for monitor, microphone, light, etc. The mount can tilt 180° and and swivel 360°. Its tilt axis is quickly tightened via a knob to suit different weight and features tested durability, with tilt load capacity decreased by no more than 20% after 10,000 tilts, while its pan axis is 360° adjustable via an Allen wrench. Bouncy locating pins on the top help secure Ninja V/ V+; and 1/4"-20 threaded holes at the bottom allow attaching Magic Arm 2070, etc. Both thumbscrews have holes for Allen wrench to facilitate assembly and disassembly. Note: 90° load capacity: ＜4.2kg; 45° tilt load capacity: ＜2.5kg; 30° tilt load capacity: ＜2.3kg Compatibility: 5” and 7” monitor In the Box: 1 x Monitor Mount 1 x Allen Wrench Product Parameters Product Dimensions: 45 x 52.6 x 30mm Package Dimensions: 78 x 67 x 42mm Net Weight: 78g±5g Package Weight: 98g±5g Material(s): Aluminum Alloy, Stainless Steel SmallRig Universal Rotating NATO Side Handle 3847 is designed to assist with camera movement and enhance shooting stability. Made of strong, lightweight magnesium alloy and carbon fiber, this handle can rotate 360 degrees during filming via the unlock button and fits the left or right hand with its ergonomic design. It comes with such accessory mounting points as a cold shoe mount on the top for Monitor Mount 2905B, microphone, LED light, etc.; an ARRI 3/8"-16 locating hole for Monitor Mount 2903B; three 1/4"-20 threaded holes for Magic Arm 2070B, Magic Arm with Small Ball Head 2157, etc.; and a strap hole for Hand Strap 3848 for more stability. A magnetic spanner is included at the bottom for easy access. Also, in the box, there is a NATO rail for you to mount the handle onto cages without NATO rail on both sides. Note:Load Capacity: 5kgPlease do not press the buttons for rotating the two handles together while the handles are installed on both sides of the camera, in case the camera falls Compatibility： Cage with built-in NATO rail; or attaches cage via the included NATO Rail In the Box:1 x Side Handle1 x NATO Rail (BUN2468B) Specifications： Product Dimensions: 111.5 × 63.8 × 77.3mmPackage Dimensions: 127 × 112 × 88mmProduct Weight: 205g ± 5gPackage Weight: 294g ± 5gMaterial(s): Carbon Fiber，Magnesium Alloy，Aluminum Alloy, Stainless Steel On Jun 18, 2024 at 13:51:10 PDT, seller added the following information:
Price: 69.99 USD
Location: Perth Amboy, New Jersey
End Time: 2024-08-25T07:09:04.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Compatible Brand: For Sony
Brand: SmallRig
Colour: Black
Compatible Series: For Sony Alpha
Compatible Model: For Sony A7SIII, For Sony A1, For Sony A7R IV, For Sony A7IV
To Fit: Camera
Type: Camera Cage
Available Variations
Color: Cage
Price: 69.99 USD
Available Quantity: 980
Quantity Sold: 0
Color: Cage+Hand Strap
Price: 78.9 USD
Available Quantity: 980
Quantity Sold: 0
Color: Cage+Side Handle
Price: 98.9 USD
Available Quantity: 980
Quantity Sold: 0
Color: Cage+Top Handle
Price: 98.9 USD
Available Quantity: 980
Quantity Sold: 1
Color: Cage+Top Handle+Monitor Mount
Price: 123.8 USD
Available Quantity: 980
Quantity Sold: 0
Color: Cage+Side Handle+Top Handle
Price: 123.8 USD
Available Quantity: 980
Quantity Sold: 1
Color: Cage+Rotating NATO Side Handle
Price: 188 USD
Available Quantity: 980
Quantity Sold: 0
