SmallRig 3667B Full Camera Cage for Sony Alpha 7R V/7 IV/7S III/1/7R IV

Description: About this item-Camera Cage 3667B Improved Design: 1. A cold shoe is added to the upper right corner of the cage to facilitate the installation of accessories such as Microphone 3468 and LED Video light 3286; 2. Two 1/4"-20 threaded holes with a spacing of 18mm are added at the bottom, which is compatible with SmallRig Quick Release Plate for Arca 3154. A QD hole is added at the bottom, which is compatible with QD quick release shoulder straps and other accessories.For Sony A7R V/A7 IV/A7S III/A1/A7R IV: SmallRig Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. NOTE: The Cable Clamp for HDMI 3000 is not compatible with Alpha 1 and Alpha 7R IV because it will block the synchro terminal interface when used on the Alpha 7R V.Multiple Mounting Points: The cage has multiple 1/4"-20 holes and 3/8"-16 positioning holes for ARRI, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903B. There are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment; the QD hole at the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and bottom of the cage to attach Wrist Strap PAC2456 and Shoulder Strap PSC2428.Three-Point Locking: A positioning pin is added at the bottom of the cage, and the 1/4"-20 screw and the left M2.5 screw form a three-point locking to make the camera stable. Adjust the direction of the left locking slider to adapt to different models, [A7 IV] side is suitable for Alpha 7 IV and Alpha 7R V, [A7S III/A1] side is suitable for Alpha 7S III / Alpha 1 / Alpha 7R IVAll-Round Protection: Built-in all-round rubber gasket to prevent scratches. With the cage installed, the camera interface, dials, buttons and changing batteries are not affected. The opening and closing wrench design is added to the position of the battery compartment, which fits the curve of the fuselage more, solves the problem of placing the little finger, and enhances the grip of the fuselage.Built-in Quick Release Plate: The bottom quick release plate for Arca has added 1/4"-20 holes with a spacing of 18mm, which is compatible for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, and can also be adapted to DJI RS 2 / RSC 2 stabilizer mounting board (riser plate) and SmallRig Quick Release Plate for Arca 3154. About this item-NATO Top Handle（Lite） 3766 Comfortable Ergonomic Grip: The NATO top handle features a silicone part with a 4-finger texture, providing a more comfortable and anti-slip grip. It is designed for easy low-angle shooting and to reduce strain on the arms.Easy to Use: With the compatibility for any camera cage featuring NATO Rail, the top handle can be quickly mounted on the camera cage via a NATO Rail. The built-in knob helps tighten the NATO clamp making it easy to assemble and disassemble. No extra tools required.Lightweight and Solid: The handle body is made of aluminum alloy and features a hollowed-out design, which ensures that the handle weighs 124g (0.27lbs) while supporting a weight of up to up to 10kg (22lbs).5 Built-in Cold Shoe Mounts: The front of the handle has 3 cold shoe mounts, while the back end has 2, allowing for connection of up to 5 external devices simultaneously, such as LED light, monitor, microphone, transmitter, and more.12 Threaded Holes: Ten 1/4" threaded holes and two 3/8" threaded holes for arri could attach more accessories, such as monitor mount 2903B and magic arm 2066B. About this item-Quick Release Safety Rail (46mm) 1409 Compatible: This 46mm Nato Rail Is Compatible with Standard Nato Accessories for Quick Release, Such As Clamps, Handles and Monitor Mounts, Enabling You to Quick Attach and Release the Rig ComponentsAnti-off Design: the Safety Pins on Both Side Prevents Your Nato Accessories from Accidentally Sliding offMounting Options: It Can Be Attached to Any Accessories with Two 1/4-20 Holes via Two 1/4-20 Screws (Included) to Provide a Mount for Nato Handle, Evf Mount, Nato Clamp, and Camera Plate, EtcRecommendation: If You Prefer Other Nato Rail Lengths Options, We Have Smallrig Nato Rail 1134(100mm), Nato Rail 1195(70mm)Includes: 1 X Nato Rail, 1 X Allen Wrench, 2 X 1/4'' Screw. Material(S): Aluminum Alloy

Price: 74.99 USD

Location: shenzhen, Guangdong

End Time: 2024-12-20T16:47:18.000Z

Shipping Cost: 0 USD