Silver-Bond AD1 Low Cost, One Part Heat Dry Electrically Conductive, Silver Epox

Description: ELECTRICALLY CONDUCTIVE ONE PART LOW COST EPOXY ***This product requires heat to harden or cure. At lease 350F for 1 hour.PRODUCT DESCRIPTION: Silver-Bond AD1 Low Cost, One Part Heat Dry Electrically Conductive, Silver Epoxy Adhesive is a single component epoxy, formulated with pure silver powder combined with organic binders and solvents to produce electrically conductive paths, films or patterns over non-conductive substrates. Silver-Bond AD1 Low Cost, One Part Heat Dry Electrically Conductive, Silver Epoxy Adhesive shows slight settling when stored for a long period of time, no caking and will re disperse to a smooth homogeneous state. Silver-Bond AD1 Low Cost, One Part Heat Dry Electrically Conductive, Silver Epoxy Adhesive formulation produces electrically conductive paths on a wide variety of surfaces including plastics, rubber, cloth, thermoplastic, paper, wood and many others. Silver-Bond AD1 Low Cost, One Part Heat Dry Electrically Conductive, Silver Epoxy Adhesive designed for use in diversified applications as microwave EMI & RFI shielding, in the assembly or repair of printed circuit boards, wave-guides, electronic modules, flat cable, static shielding, connections, and circuitry.PRODUCT PROPERTIES:AppearanceSilverCure TypeHeat cureBenefitsHigh strength Perfect bond EMI & RFI shielding Wave guidesSubstratesExcellent choice for Integrated Circuits, aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards.CatalystAnhydrideHardness, Shore D83Typical Applicationsmicrowave EMI & RFI shielding, in the assembly or repair of printed circuit boards, wave-guides, electronic modules, flat cable, static shielding, connections, and circuitry.UNCURED PROPERTIES:Viscosity @ 25 C cps6,800Density gm/cc2.35Silver , %70-72Shelf life6 MonthsOperating Temperature-45C to 170CPot Life @ 25 C6 months @ 25C 9 months refrigeratedCURE SCHEDULE:60 min@ 120C, 248F30 mins@ 150C, 302F10 mins@ 175C, 347FPHYSICAL CHARACTERISTICS:Sheet Resistivity10-12 m/sqBulk Resistivity3x10-5/cmAdhesion Tensile Strength1000 N/cm2 (1500 lb/in2)Lap shear Strength1400 N/cm2 (2000 lb/in2)Thermal Conductivity0.04J/(cm.s. C):[0.01cal/(cm.s. C)]Specific heat0.30J/(g. C) :[0.07 cal/g. C]Coefficient of Thermal Expansion3x10-5 (m/m)/ CModulus of elasticity:4x10+10(4*10 power of +10) Pa (6x105lb/in2)GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).HOW TO USE: 1) Carefully clean and dry all surfaces to be bonded. 2) Apply Silver-Bond AD1 Low Cost, One Part Heat Dry Electrically Conductive, Silver Epoxy Adhesive completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured. 3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use. 4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.AVAILABILITY: This epoxy can be supplied in various different packages. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Price: 16.99 USD

Location: Warwick, Rhode Island

End Time: 2024-01-31T13:31:23.000Z

Shipping Cost: 0 USD