Silk PLA 3D Printer Filament Triple Color Silk PLA Filament 1.75Mm 3D Printing F

Description: Store New Arrivals Add to Favorite View Feedback Contact Silk PLA 3D Printer Filament Triple Color Silk PLA Filament 1.75Mm 3D Printing Filament Fit Most FDM Printers, 250G Spool(0.55Lbs), 3 in 1 Color Rose Red Sky Blue Green Description TRI-COLORS COEXTRUDED FILAMENT: Different from normal or gradient filaments, every inch of this silk PLA filament is made of three colors. You can see three different colors of rose red, sky blue and green at different angles. Three colors are integrated in the silk PLA filament, and multi-color printing can realize three colors in one model. Printing will be full of surprises as different models will present different effects.NO CLOGGING & NO BUBBLE: 3Dgenius PLA 3d printer filament features 100% vacuumed package. The silk PLA filament completely dried for 24 hours before packaging and then vacuum sealed with desiccants to effectively protect the filament from moisture, no stringing and bubble-free. 3Dgenius PLA filament 1.75mm will give you a smoother and more stable printing experience.HIGH DIMENSIONAL ACCURACY: 3Dgenius PLA filament 1.75mm adopts advanced CCD diameter measuring and self-adaptive control system, which guarantees the diameter accuracy of 1.75mm PLA filament +/- 0.03 mm. The minimum dimensional tolerance ±0.03mm will make the fusion between the layers very good to obtain an even better bridging result.WIDE COMPATIBILITY & PRINTING TIPS: The silk pla filament is 250g/0.55lbs. 3Dgenius 3d printer Filament is compatible perfectly with most FDM 3D Printers that use 1.75MM filament on the market, such as Prusa, Makerbot, MK3, Ender 3 and more. Recommended Extrusion/Nozzle Temperature 190°C - 235°C (374°F - 455°F). Bed/Platform temperature 50°C - 60°C (122°F - 140°F). Print Speed: 30-60mm/s.HIGH QUALITY & CHARMING GLOSS: 3Dgenius silk PLA filament 1.75mm have advantages of high purity with low shrinkage and superb layer bonding. The enhanced toughness of the 3d printing filament will bring you more room for 3D printing imagination. The silk 3d printer filament is made from upgraded PLA raw materials which can show a charming gloss on the surface of the models. Product Description Tri-colors Coextruded Filament for You to Enjoy Your Printing From Now on! Different colors at different angles, you can see rose red, sky blue, green. Three colors are integrated in silk PLA filament, and multi-color printing can realize three colors in one model. Therefore, you will easily get all colors, even for very small prints. Printing will be full of surprises as different models will present different effects. Just enjoy your printing from now on! Recommended Print Setting for the Silk PLA Filament 3Dgenius PLA 3d printer filament is neat on the roll and leaves the spool easily without any crossed turns. It can avoid possible thread pulling, twisting or line breaking, it will make your printing smoother. The PLA filament completely dried for 24 hours before packaging which effectively protect the silk filament from moisture, no stringing and bubble-free. You can just enjoy your printing with 3Dgenius pla filament 1.75mm from now on! Diameter: 1.75mm(Dimensional Accuracy +/- 0.03mm) Recommended Extrusion/Nozzle Temperature: 190°C - 235°C (374°F - 455°F) Bed/Platform temperature: 50°C - 60°C (122°F - 140°F) Print speed: 30-60mm/s Nozzle≥0.4mm High Dimensional Accuracy & No Clogging and No Bubble! 1.75mm PLA 3D printer filament with high dimensional accuracy tolerance of + / - 0.03 mm which makes the fusion between the layers very good to obtain an even better bridging result. It will resist warping and produce the cleanest, least stringing prints with glossiest finish. 3Dgenius PLA filament 1.75mm will meet your demands for printing freely. The silk PLA filament is 250g/0.55lbs. The PLA filament completely dried for 24 hours before packaging and then vacuum sealed with desiccants. The vaccum package protects the filament from moisture and makes the PLA 3D printing filament no clogging and no bubble when printing. Tips 1. Before printing, please check the temperature setting as silk PLA filament printing temperature is about 190-235℃. And please make sure that the 3D printer filament is not tangled. 2. Cleaning or changing the nozzle before printing is a good way to reduce jam if the nozzle was used for many times. 3. The filament tends to absorb moisture from air, which can make it brittle or degrade. Please make sure 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture. 4. The first layer printing speed is recommended to set in 40-60mm/s. It will make the later printing process more conductive. 5. Some PVA glue is recommended to apply if the plate surface has been used for a long time; 6. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; Item Diameter 1.75 Millimeters Color Tri Colors(rose Red+sky Blue+green) Material Polylactic Acid Material Type Polylactic Acid Item Weight 11.52 ounces Size 250g SHIPPING Fast shipping is very important for us. Domestic Shipping: Free domestic shipping to most addresses in the lower 48 states. All orders ships from our US-based warehouse location/state closet to customer. Your order will be shipped within 1-3 business days upon full payment received. Most items are delivered within 3-5 business days, however, please allow 3-10 business days. We are shipping only to addresses within the USA . We only ship to the confirmed address. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. International Customers: International customers are responsible for all import duties and taxes charged by the destination country. Our standard shipping service is FREE. ******************************* Electric Products: International Buyers - Please Note: Our electric products are manufactured according to the specifications of the USA/Canada Electrical Standards and Codes. Customer Service & Feedback RETURNS Returns: Free Returns from domestic shipping addresses based on eBay Return Policy. Please contact us for RMA and FREE return label before returning the item to avoid shipping your return to the wrong address. Returns are not accepted after the 30-day of receiving the item PAYMENT We accept PayPal. CONTACT US This page content is yet to come Please ad us to your favorite seller and visit again later Thank You CUSTOMER FEEDBACK & SATISFACTION Trust is important to us so we will work with you to guarantee your satisfaction! If you have any question, please contact us through "Contact Seller" link. We will respond within 1-2 business days. Thank you for shopping with us!

Price: 19.25 USD

Location: Niagara Falls, New York

End Time: 2024-12-16T11:01:58.000Z

Shipping Cost: 0 USD