Siglent SPL2016 Compatible Logic Probe , Test Clips.New

Description: This listing is for a solderless type Siglent SPL2016 compatible logic probe with a 3D printed pod and base holder and 20 test clips . Some assembly is required.Instructions: The probe is shipped partially assembled to avoid creasing the cable. To assemble, use a phillips head screwdriver to open the base (part that inserts into the scope). Using your fingernail or a tool (plastic preferably) open the latch. It opens longitudinally away from the connector. Insert the flat flex cable with the blue tab facing up away from the PCB. It is possible to insert the cable incorrectly. Make sure that you feel it slot in. If the cable is crooked or not pushed all the way in the probe will not work. Close the latch while holding the cable in place. Tug gently to make sure the cable is retained. Reassemble the base and attach the cable to the pod in the same way with the blue tab facing away from the PCB. Notes: The probe acts as an approximate 1/10 voltage divider to fit the scopes input comparator operating range. Suggested maximum frequency is 50 MHz. I have measured the probe with a P6205 and a VNA. An example waveform is shown in the listing photos. The output voltage is slightly below 10%. Likely due to probe loading and measurement inaccuracy. This probe can be used over the full +-10V operating range supported by the scope. we have a duty free number for most countries for ham radio items. There would be no custom duty tax, but, you will be responsible for the VAT tax, that is based on the value of the package. All you pay me is for the item and shipping.- Import duties, taxes, and charges are NOT INCLUDED in the item price or shipping charges. These charges are the buyers responsibility. - Please check with your countrys customs office to determine what these additional costs will be prior to bidding / buying. - These charges are normally collected by the delivering freight (shipping) company or when you pick the item up , do not confuse them for additional shipping charges Do not leave nagative feedback before we provided service for you,thanks.INFORMATION: Our shipping and warranty policies are based on manufacturers policies. We usually ship with in 3 business day after payment is received, usually on the day of payment. If you purchase more than one item at a time from my Ebay store, please contact me for combined shipping. This item may require a signature on delivery.

Price: 79.99 USD

Location: Fuzhou, Fujian

End Time: 2024-12-16T13:47:20.000Z

Shipping Cost: 0 USD