Description: These orifice hoods are fairly generic, especially before ~2000, so may fit many gas ranges and other appliances. You normally must change them when converting between natural gas (NG) and propane (LPG). Verify that your gas valves have a matching 1/8-27 NPT thread and that the hood will fit into the burner supply tube. They have a no. 72 starter hole (25 mil = 0.025") which you drill larger to the size needed. Your appliance manual should list what orifice sizes are needed for each burner, for either NG or LPG (usually differs). You may also need to adjust the main pressure regulator. Commonly, it should output 5" water column pressure for NG and 10" w.c. for LPG. Not all appliances can be converted. If you need more than these 6, perhaps you can re-purpose a few existing ones (drill larger if needed). I bought these for my own conversion, but later found ones drilled to the sizes needed, so flipping them at half what I paid.
Price: 40 USD
Location: Sacramento, California
End Time: 2025-01-14T07:17:14.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Type: Burner Orifice Hood
Power Source: Natural Gas
