Description: Safety Pipe Marker, Pipe Center Finder Measure Pipe Diameter Over 0.5" and UpY-Head Shape Base with a DSL Use to measure pipes and tanks that is 5" in diameter or larger 【Economical Measuring Tool】This Pipe Marker Centering Tool is efficient and useful for setting center lines, determining angles and marks for butt-ins and locating points inside pipes or tanks, arranging keyways and calculating declivity. It can measure tanks or pipes with a diameter of at least 1/2" or larger. 【Easy to Operate】 Step 1.Loosen or tighten the hexagonal nut with the included hex key allen wrench. Step 2.Place the pipe marker tool on the pipe and find the angle you want. Step 3.Push the center column down to the fixed point position. Step 4.Tap with a hammer to leave a fixed point mark on the pipe. 【Sturdy Material】 The pipe fitter tool can wrap around the circumference of pipes to measure and mark, and it is made of a highly flexible, heat-resistant gasket material. This Pipe Center Finder Tool is easy to use for pipe fitters and welders as a must have tool. 【Y-Head Shape Base with a DSL】 This safety pipe center finder has a 4 inch Y-type base fitted with an adjustable dial bubble protractor (DSL). You could push the center column down to the fixed point position as you want. It is a must have on your list of pipe welding tools. · Used for setting center lines · Establishing angles /marks for butt-ins · Locating points inside pipes/tanks Judge the horizontal state：Bubble of green liquid needs to be in the middle of these two lines to determine. Note: When determining the angle, the green bubble should be in the horizontal position whatever the angle is.
Price: 49.99 USD
Location: Sterling Heights, Michigan
End Time: 2024-09-20T21:43:14.000Z
Shipping Cost: 4.6 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Anblak
