Rule iL280PG Inline Submersible Water Pump, 12V, 280GPH, 1080 LPH, 14 PSI, 12VDC

Description: Up for sale is a new bulk pack (no retail packaging) Rule iL280PG 12VDC / 4.5Amp inline submersible pump. It can deliver 280 gallons per hour of fresh or sea water and can generate up to 14 psi. It's great for bilge pumping, showers, water delivery systems, rain barrels, pools, gardens, water transfer, etc. New bulk pack item (no retail packaging). May have minor cosmetic blemishes due to shelf storage! Please see my other listings if you need to purchase this same pump with a ~14 foot extension cable, thanks! Manufacturer: RuleModel: iL280PGVoltage: 12 VDCCurrent: 0.6 - 4.5 AmpsPort sizes: Barbed for 1/2" ID tubingPump draws 0.6 Amperes @ open flow, 280 GPH (1080 LPH)Head: 32 feet, 14 PSI maxAttach a hose to inlet or use a strainer and submerge pumpOverall dimensions: 6.5" L x 1.5" Diameter~3 foot (~35 inches excluding plug) power cable terminated with a 2 pin waterproof plug (can be removed and replaced with your own connector as long as it's waterproof). See my other listings if you need the mating connector/cable alsoWeight: 10.2 oz (289 g)Max Water Temperature: 176F (80C) Note: Pump is not self-priming (water must be gravity fed or pump must be submerged) WARNING: As with any submersible pumps, if electrical connector is submerged, care must be taken to ensure junction is completely waterproof, otherwise pump will be permanently damaged due to water ingress in a matter of hours (water will wick through the inside of the cable and reach the motor). I recommend using the proper mating waterproof connector and optionally filling the connector with dielectric grease if it will be submerged more than a couple feet deep. My items are always packed properly and securely. Thanks for looking!

Price: 26.99 USD

Location: Chino, California

End Time: 2024-08-19T12:09:09.000Z

Shipping Cost: N/A USD