RJ45 Ethernet Network Surge Protector Outdoor Arrester Protection Device for ...

Description: The destructive power of thundering is extremely large. It is not enough to rely on external thundering protection ( thundering rod). Thundering waves will indirectly or indirectly (through electromagnetic induction) invade electrical passages and metal passages (such as power cables, signal cables, antenna feeders and metal pipes). The resulting thundering overvoltage and surge voltage will cause great harm to electrical equipment, and information network systems. If the cables is damaged, the equipment will be damaged and the system will be paralyzed, resulting in an incalculable loss. Rapidly changing thundering currents induce high voltages on electrical loops and twin-wires that can damage the insulation of the system. Various operations of the power system can generate operating overvoltage on the power cable.Some electrical equipment switching operations and short circuit trips can generate overvoltage (surge voltage) higher than the normal working voltage in the power cable, thereby causing damage to the electrical equipment. Fixed interface shielding external EML,RFL and other electromagnetic interference. Built-in 8 TVS anti-detonator, prevent thundering and other abnormal current through the network cable damage to your computer equipment. Connector :RJ45 8 Pin Female to Female The Network Surge Protector Suppressors protects a single data line, including computer network signals, communication equipments and more. Insert a Network Surge Protector in your data cables, and connect them to the ground, to prevent lightning surging, so as not to damage your devices, you will not waste your money. Multi-level protection circuit, high-speed protection accessories, low capacitance design, fast response, low output residual voltage and superior transmission performance. The standard RJ45 shielded interface of Ethernet Network Surge Protector is suitable for overvoltage protection of ETHERNET 10/100M BASET network equipment (such as SWTICH, HUB, ROUTER). It suppresses high-voltage pulses on the line and protects the back-end equipment from lightning and industrial surges. There is no "In" or "Out" cable side of this device, both sides are identical RJ-45 Interface.Regardless of whether your protected device is behind any particular side, it can work properly by connecting the correct cables. Network Surge Protector is connected in series in front of the input of the protected device. The input of Network Surge Protector is connected to the external signal cable. The output of the Network Surge Protector is connected to the signal input of the protected device.And connect the green ground wire to the ground.

Price: 18.67 USD

Location: Brentwood, New York

End Time: 2024-11-05T16:43:03.000Z

Shipping Cost: 0 USD