RFID 2.4GHZ Wireless Immobilizer Car Anti-Theft Engine Lock Smart Alarm System

Description: RFID 2.4GHZ Wireless Immobilizer Car Anti-Theft Engine Lock Smart Alarm System Overview: Applicable models: 12V gasoline car Installation location: Connected to the oil pump circuit or ignition switch Product function: Automatic fuel cut-off and flameout or automatic power cut-off and flameout Product features: 2.4GHZ high RF identification technology, easy to install, and stable performance Features: *1. Anti-hijacking(robbery) function mode: (without short circuit ring inserted on the unit) Factory default: After receiving the signal, the unit can start the car engine normally. If the unit cannot receive the signal for 30-40 seconds, and the buzzer sounds once per second. If the signal cannot receive the signal for 41 to 50 seconds, it will sound twice per second. Unable to receive signal for 51 to 60 seconds, 3 sounds per second. After 60 seconds, if the signal is not received, the engine will turn off and the buzzer will not sound. *2. Directional dormant lock function mode: (insert short circuit ring on the unit): 1) When the engine starts, the unit receives a signal within 25 seconds, the buzzer sounds, and the car starts normally. If not, the engine shut down. 2) When starting the engine for the second time, the unit receives the signal and can start normally. If the unit still cannot receive the remote control signal, the engine will shut down after 20 seconds. 3) Start the engine for the third time (or more), as long as the unit receives the signal, it can start normally. If the unit cannot receive the signal, the engine cannot start. It is not possible to start normally until receiving a signal from the remote control. 4) The remote control signal is no longer sensed midway, and only when the engine is turned off and restarted, the signal needs to be re-sensed. *3. New technology 2.4Ghz RFID engine lock for 12V vehicle *4. Intelligent NO scan card lock and unlock the car engine automatically *5. Anti-hijacking (Anti-robbery) intelligently *6. Engine circuit cut off intelligently *7. Two thin transmitter *8. The car engine will be locked automatically and could not be started beyond 2 (-8)meter *9. Approach to the car within 2 meter, the engine will automatically unlock *10. You can put the remote inside pocket, the engine will automatically lock and unlock *11. Anti-hijacking mode, intelligent circuit cut off *12. Without the remote, even use the car key can not start the engine *13. Emergency release: if the remote lose or the remote is with low power, press the reset button for 3 times and keep press the button at the third time until the buzzer of the main unit chirp 3 times *14. Very easy to install Description: *1. Remote Control Instantaneous Working Current: ≤10mA *2. Remote Control Standby Current: ≤3uA *3. Remote Control Battery Specification: CR2032 *4. Remote Control Frequency: 2.4GHz *5. Operating Voltage of the Unit: 12V ± 3V *6. Unit Standby Current: ≤ 18mA *7. Unit Control Current: ≤ 30A *8. Control Box Size: 6 x 2.4 x 1.5 cm (L x W x H) *9. Remote Controller Size: 5.4 x 2.9 x 0.55 cm (L x W x H) *10. Weight: 0.12KG *11. Packing Size: 160*92*50mm About installation: The product need installed by professionals with car electrician certificate. For DC 12V vehicles only. The item without central door lock function, only control the engine. Package Includes: 1 x Main Control Unit With Wire 2 x Remote Control 1 x English User Manual FAQ: *1. Can this product be used to control 24V trucks? At present, this product can only control 12V products, including cars, motorcycles, etc *2. Is the product easy to install? This product is easy to install. The buzzer and Manual fire alarm activation are well matched, and no wiring is required. Directly connect the red and black power cables, with the black to iron (negative) and the red connected to the positive (long-term) of the power supply. Two thick green wires are connected to cut off the two ends of the circuit or oil circuit to be controlled. *3. I connected the positive and negative terminals of the power supply, but how cant I test whether the product relay is on or off? The red and black wires are the power supply terminals of the host, and the relay and buzzer are powered from the green wire. Therefore, at least one of the green wires must have 12V power to work. This is designed considering that the relay cannot work for a long time and consumes ele

Price: 28.8 USD

Location: Monroe Township, New Jersey

End Time: 2024-02-21T13:08:21.000Z

Shipping Cost: 0 USD