Description: Arinst SSA-TG LC R2 is a panoramic spectrum analyzer (RF multimeter) designed to display signal spectrums in the frequency range from 36 MHz to 5990 MHz. The analyzer finds the amplitude and frequency of spectral components of the analyzed process. Spectrum analyzer can operate with signals for all widely used technologies: Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS and others. Another important feature is the presence of additional capabilities of the tracking generator, which makes it possible to measure the frequency response of passive or active devices, for example filters or amplifiers. The software allows measuring SWR and return loss module. This requires anexternal directional couplerand aset of calibration measures. You can download the instructions here: arinst.net/files/Manual-Spectrum_Analyzer_Arinst_SSA-TG_R2-ENG.pdf Video: youtube.com/watch?v=-bNuaD0m_hk Arinst SSA-TG LC R2 is a cost-reduced versionof Arinst SSA-TG R2. There is no built in battery and data do not transfer via bluetooth in the LC version. The device transmits data and receives power only by USB cable. Smartphone or tablet are not included in the box!Application Arinst SSA-TG LC R2 is primarily intended for field operation. The device is rugged and light with low energy consumption. It enables service centers and maintenance teams to perform on-the-spot HF analysis for commissioning and repair works. Moreover, the spectrum analyzer is a perfect solution for repair workshops and radio amateurs. For example, using the device you can perform the following operations: put an external antenna on the base station to conduct a rapid analysis of RF environments check the correct operation of the repeater cellular repair and adjustment of the repeater, generator, filter, etc. measure SWR when using an external directional coupler.Principle of operation The spectrum analyzer is a device that is connected to the measured circuit. The device is controlled by one of two ways: by an Android powered smartphone or tablet. by a PC or laptop with Windows operating system All the measured data is displayed in real time on the screen of the smartphone/tablet/PC. You can install the analyzer software to control by smartphone or tablet from the Google Play (play.google.com/store/apps/details?id=com.arinst.ssa) or download from www.arinst.net/download-apk.php You can download the analyzer software to control by PC or laptop from www.arinst.net/download-apk.php. Windows 7 or higher and the latest version of Java Virtual Machine are required for the correct work of application. The application requires full (100%) support for OpenGL version 2.1 and higher.Basic functions of the analyzer software: Displays the signal spectrums graphically and sets up the frequency range and reference limit. Sets up and manages absolute and relative (delta) markers. Searches one or a series (up to ten) of maximum values of the signal in the instantaneous or tracking mode. Sets and stores unique identifiers of the frequency ranges - bands. For instance, a band titled «DCS UpLink» can be set for the range 1710-1785 MHz. Additionally, working frequency bands can be set for each operator. This option considerably facilitates the HF analysis and identification for the signals of conventional technologies. Has pre-set bands and is able to store the bands in a file and share them with other devices to control the spectrum analyzers Arinst SSA-TG LC R2. Has the tracing mode that generates a signal spectrum averaged by a number of measurements. In addition to the average spectrum, extreme values and moving average values can be displayed as well. Stores the settings for the spectrum scanning (band limits, attenuator value and others) for a quick and easy switching into the required measurement mode. Stores the spectrum signal with markers for later analysis. Then the stored graph can be opened in any Android device with the application «Arinst SSA» (in this event you don’t need to have the spectrum analyzer at hand) or use the table editor to convert the graph into the required type of data display. Simultaneous display of several selected frequency bands. The function of the tracking generator for measuring the amplitude-frequency characteristics of filters, amplifiers and antennas.Advantages: low price wide frequency range: 36 MHz to 5990 MHz rapid scanning of the frequency range: approx. 500 µs per point high measurement precision: 2 dB within the dynamic range 70-75 dB compatibility with most Android powered devices and Windows-based computers possibility to use one device with the help of several smartphones/tablets/PCs free multifunctional software and free updates for the device controlSpecifications: Displayed frequency range: 36 MHz — 5990 MHz Measured frequency range: 36 MHz — 4500 MHz Dynamic range for 36 MHz — 3000 MHz band: 75 dB Dynamic range for 3000 MHz — 4500 MHz band: 70 dB Maximum Span: 5954 MHz BW: 200 kHz, fixed Scan speed for a viewing band of more than 100 MHz: 700 MHz/sec Sweep 100 MHz: < 0.1 sec Noise floor up to 3000 MHz: < - 90 dBm Noise floor 3000 MHz — 4500 MHz: < -85 dBm Noise floor 4500 MHz — 5990 MHz: < -80 dBm Wave impedance: 50 Ohm SWR at the operating frequency range: < 1,5 Internal attenuator: 0 — 30 dB Error with attenuation up to 10 dB: 2 dB Error with attenuation from 10 to 20 dB: 5 dB Error with attenuation from 20 to 30 dB: 8 dB The output power of the tracking generator: -15...-25 dBm Accuracy within the dynamical range: 2,0 dB Maximum input power at attenuator 0 dB: 10 dBm Maximum input power when the attenuation is above 20 dB: +20 dBm Maximum input measured signal: +10 dBm Maximum input DC voltage: 25 Volts Maximum current consumption: 450 mAItems included in the box: Spectrum analyzer Arinst SSA-TG LC R2 HF adapter SMA(male)-SMA(female) to protect the HF connector from wear-and-tear (2 pcs) USB – mini-USB cable to charge the device and for data transmissionItems not included in the box: Smartphone or tablet under the Android’s 4.1 control or higher. Use your Android powered device in order to control the equipment. The device is implemented in one body, while the equipment for its control is built in another. It has been done in order to make the spectrum analyzer much simpler and more available. Also, use your laptop or computer for controlling the device. External attenuation network. The maximum measured input power, which is supplied to the device, is limited by +5 dBm. If it is necessary to measure a larger value, each user of the device has to select the necessary attenuators on one’s own. Set of the super-high frequency adapters.Limitations The spectrum analyzer Arinst SSA-TG LC R2 is not a measure gauge, as it does not have an approved pattern of the measuring equipment. The approval of pattern of the measuring equipment has had a negative effect on the availability and price of the device. For this reason the spectrum analyzer is officially considered a field indicator. However, the device fully meets all technical requirements. Each device is calibrated against the power and frequency.Overview of the software and Arinst SSA-TG LC R2 training. Video "Software review of Arinst" youtube.com/watch?v=4YDpTX9RDo8 Video "Arinst of tracking generator review" youtube.com/watch?v=l6sBgmta8bc Video "Frequency merges in the Arinnst SSA spectrum analyzer" youtube.com/watch?v=HIYLpmzRbgk Video "Connection setup for Arinst SSA under Windows OS" youtube.com/watch?v=Yw82FJ-nldg Video "Arinst manual calibration menu" youtube.com/watch?v=WGkk594eri0 Video "Signal identification using Arinst SSA" youtube.com/watch?v=A773XqF-OXg Video "Bands management in the Arinst SSA spectrum analyzer" youtube.com/watch?v=C-Q8o0Dtync Official site: arinst.net
Price: 269 USD
Location: Almaty
End Time: 2023-11-23T23:50:54.000Z
Shipping Cost: 34 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Model: SSA-TG LC R2 With Tracking Generator
Product: Spectrum Analyzer
MPN: Does Not Apply
Brand: Arinst
Frequency Range: 36 -- 5990 MHz