Description: This is a replacement set of 2 horns for the Ox from TPI. You will receive 1 left and 1 right horn set. This is for the ox that had the angled horns and screw hole. Each horn is a different angle and both were created to mimic the originals although the originals were quite rough with lots of mold lines so we made them a lot smoother. These do have the hole for the screw made into the design like the originals. This is a 3d printed design created and printed by our family. The 3rd picture shows original horns beside the 3d printed designs. The 2nd picture shows the printed horns on the tpi ox. The video shows how easy it is to install. You will only receive one 3d printed set of 2 horns per purchase. The original horns and blow mold are shown for comparison only. We size as accurately as possible to the original part with pin type push thru parts making several sets until we are happy with the results, but your blow mold holes may be slightly smaller or larger due to difference in wear. You may need to add a small amount of glue to hold in place or you can sand part or drill a tiny bit of the hole to make fit if too tight (do not force as we can’t damage our vintage blow molds). This set went thru several rounds of testing to get them just right. They are really nice prints that are sized and shaped to resemble the originals. This is for a light tan set.
Price: 12 USD
Location: Eddyville, Kentucky
End Time: 2024-02-16T18:24:18.000Z
Shipping Cost: 6 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Type: Blow Mold
