REFUGIUM KIT - 10 Gallon Adjustable Aquarium Sump Kit

Description: This is a Dual Filter Sock Holder Sump/Refugium baffle kit for 10 gallon Aqueon® glass tanks with adjustable water depth. ** Tank Not Included ** This kit includes:Fully assembled dual 4" sock holder. Joints are bedded and Weld-On bonded for maximum strength and durability 8" main baffle with round water pass through holes for even water flow. 5.5" - 8" adjustable secondary baffle with 1/8" slots for coarse water filtering and water depth adjustment Bubble trap plateTwo 1" filter plates which can go in between the secondary baffle and bubble trap plate. These units allow you to suspend filter foam between the two plates to trap bubbles and particles escaping the main refugium/equipment section. These are self supporting so the distance between the secondary baffle and the bubble trap plate is not defined by the width of the filter plate allowing you to set your place distance based on how much extra filter material you'll need. Minimum distance is 1" 100% Satisfaction Guarantee - and we accept returns. If you are not 100% satisfied with this product you can return it within 30 days provided it has not been glued into a tank Features:Precision CNC milled from premium grade black 1/4" cast acrylicAssembled and Weld-On® cemented double 4" filter sock holder with two 1" pipe inlets.5 rows of 9 holes in the main baffle force even water flow through tankAdjustable water level baffle to provide a 5.5" - 8" deep mid sectionBubble trap plate to keep bubbles out of your return pumpBaffle Dimensions: 10" x 8" (Width x Height)Installation is simple. Using aquarium safe silicone, silicone the parts into your 10 gallon glass tank and allow 24 hours to dry. NOTE: This is designed specifically for Aqueon® 10 gallon glass aquariums. If your tank is not an Aqueon or you don't know for sure, please contact us prior to ordering with your tank inside dimensions. To measure the inside, use calipers or trim a dowel rod or rigid piece of cardboard until it fits between the front and back glass of the tank while parallel to the bottom. Message us with that length and we can confirm if it will fit. Custom kits made to your specifications are also available. No project is too big or too small. Please contact us for a quote. Why Buy From Us First and foremost we are passionate about this hobby. We have been developing innovative products for the Marine Aquarium Hobbyist since 2015. We support the community through participation in online forums, frag swaps and have even shown at MACNA. We approach the hobby through the lens of problem solutions, which led to our development of the world's most efficient biopellet reactors - the F5 series.Our refugium kits are precision milled on industrial quality CNC machines using industrial grade end mills specifically designed for plastic cutting applications. We use CNC milling instead of laser cutting because it provides the same level of precision with similar edge quality while allowing us to produce parts that won't fail in your tank. Each refugium kit is designed to take the guesswork out of putting your refugium/sump together which is why we assemble any components that need assembly prior to shipment. Our assembly process includes precision recess milling of all the mating surfaces, and bonding them with Weld-On® acrylic cement. This process is not possible with laser cut parts and it dramatically increases the surface area where the parts bond together. This makes our assembled parts exceptionally durable for lifelong, problem free operation. It also negates the need for you to purchase specialty acrylic cements, or worse yet use glue or silicone, to assemble the parts prior to installation. All you need is aquarium safe silicone to bond the parts to the tank and you are ready to go. There are lots of things that can go wrong in a saltwater tank. Protect your investment by making sure your refugium parts are not one of them. We believe in backing what we sell. This is why all of our products are made in house. We control the production so we control the quality. This is why we are the only seller on E-Bay that offers a 100% satisfaction guarantee with the ability to return any product in original condition within 30 days on all the products we sell. We make it, we sell it, we back it and if you're not happy we'll correct the issue or you can send it back in unused/uninstalled condition within 30 days for a full refund. ** Proudly Made in the USA ** Here's how we make them... 20 gallon long dual sock kit shown, but all sump kits are made the same way. Build an aquarium sump or refugium for under $100 Video will open in a new window Using the mobile app? Copy this link into your browser:

Price: 49.95 USD

Location: Headland, Alabama

End Time: 2024-08-26T19:14:08.000Z

Shipping Cost: 10 USD