Description: Model: HD4292 For Haida M10 Filter Holders No Color Casting Reduce Exposure for Sunrises or Sunsets Increases to Maximum Density at Center Haida Red Diamond 100 x 150 Hard Reverse-Grad ND Filter (4 to 1.5-Stop) This filter achieves its effect with a 1.2 band of density across its center region that provides a 4-stop reduction in light from entering a lens. This band extends approximately 15mm in both vertical directions. With a soft-edged line of transition, it tapers to a 0.45 density that provides a 1.5-stop reduction in light at the edge above it. Directly below the 1.2 band of density, it tapers to clear, with a hard-edged line of transition before the clear area. The placement of a 1.2 band of density that tapers to a density of 0.45 above it with a clear area directly below, allows the Haida 100 x 150mm Red Diamond Hard-Edge Reverse-Graduated Neutral Density 1.2 to 0.45 Filter to match the positioning of the sun when it is at, or immediately above, the horizon. In such instances, the sun can appear closer to the center of an image as opposed to the upper edge, and an increase in brightness is created that is more prominent on both sides of the sun than above it. This pattern of brightness corresponds to the density pattern on the Haida 100 x 150mm Red Diamond Hard-Edge Reverse-Graduated Neutral Density 1.2 to 0.45 Filter. The hard-edged line of transition in this reverse graduated neutral density filter is useful for hard transitions between the sky and land, while the 4-stop to 1.5-stop gradation with a soft-edged line of transition is applicable to multiple regions of brightness within the sky. What's Included: 1x Haida 100 x 150mm Red Diamond Hard-Edge Reverse-Graduated Neutral Density Filter Filter Case Light-Blocking Gasket Shipping Weight (lbs): 1 Shipping Dimensions (in): 5 x 5 x 3 Build Material: Optical Glass Dimensions: 100 x 150 x 2mm Type: Reverse Graduated Hard Neutral Density UPC Code: 6900574629024 This 100 x 150mm Red Diamond Hard-Edge Reverse-Graduated Neutral Density Filter from Haida is compatible with the Haida M10 and M10 Pro Filter Holder. It can be applied to darken bright skies, specifically during a sunrise or sunset, while allowing for a normal, unaffected exposure in the other regions of the image. Haida Red Diamond filters are constructed from shock-resistant optical glass. To prevent internal ghosting and reflections, while further enhancing clarity and color fidelity, each glass surface includes 10 layers of anti-reflective nano coatings. An additional 10 scratch-resistant hydrophobic coatings further protect the filter’s substrate and result in an improved beading effect when its surfaces come in contact with water or oil, allowing for more efficient cleaning. Additionally, Haida Red Diamond filters feature rounded edges for easier placement within a compatible filter holder slot. A metallic case for storage and transport is included, as well as a light-blocking gasket. This gasket forms a seal that is intended to prevent stray light, which could have unwanted effects on exposure, from coming in between the filter and the lens behind it. Compatible with Haida M10 or M10 Pro Filter Holder Effectively darkens bright skies, specifically during a sunrise or sunset, while allowing for a normal, unaffected exposure in the other regions of the image Band of density extends approximately 15mm in both vertical directions Density pattern corresponds to the brightness pattern of the sun when it appears at or is closer to the horizon as opposed to a higher angle, which creates an increase in brightness that is more prominent on both sides of the sun than above it Hard-edged line of transition between the band of density and the clear area below it is useful for hard transitions between the sky and land Filter does not affect the overall coloration of the image Shock-resistant optical glass construction 10 layers of anti-reflective nano coatings on each glass surface prevent internal ghosting and reflections, while further enhancing clarity and color fidelity 10 additional scratch-resistant hydrophobic coatings on each glass surface further protect the filter substrate and result in an improved beading effect when in contact with water or oil for greater cleaning efficiency Rounded edges for easier placement within a compatible filter holder slot When combined with a compatible filter holder, included gasket helps to prevent light from coming in between the filter and the lens behind it, which can have an unwanted effect on exposure Metallic filter case for storage and transport
Price: 109.99 USD
Location: Houston, Texas
End Time: 2024-09-12T20:29:04.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Brand: HAIDA
Filter Shape: Rectangular
Manufacturer Warranty: 1 Year
MPN: ES-T07-BMPCC4K, HD4292
Country/Region of Manufacture: China
Filter Effects: Hard-Edge Reverse-Graduated Neutral Density
Mount Fitting: Drop-In
Filter Size: 150mm
To Fit: For Haida M10 Filter Holders or 150mm Filter Holders
California Prop 65 Warning: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
