QIOTEK ZealotH743 PIXHAWK Multi version Flight Control PIX Vertical Takeoff

Description: QIOTEK ZealotH743 PIXHAWK Multi version Flight Control PIX Vertical Takeoff and Landing Helicopter UAV Multi Axis Description The QioTek ZealotH743 is an internal vibration dampened autopilot with a protective CNC metal case for ruggedness. It features fully redundant sensors, an expanded number of outputs, temperature-controlled IMUs, and has an integrated AT7456E OSD chip. Available in 3 editions Standard, Industrial and Industry Application, you can select packages with and without GPS. Check the specs carefully – the Zealot-H743 has higher specs than many competitors! The Zealot H743 supports all versions of Ardupilot from 4.2.0 including ArduPlane, ArduCopter, ArduRover, ArduSub. Specification Processor: MCU – STM32H743VIT6 36KB FRAM – FM25V02 Standard Edition Sensors Gyro/Accelerometers: ICM42688P, ICM40605, ICM20689 or ICM40605 Barometers: DPS3018 *2 Compass: QMC5883L Industrial Edition Sensors Gyro/Accelerometers: IIM42652 (Invensense Industrial level sensor)，ICM42688P, ICM20689 or ICM40605 Barometers: DPS3018 *2 Compass: QMC5883L Industry Application Edition Sensors Gyro/Accelerometers: ADIS16470 (Analog Devices Industrial Application-level sensor) This advanced IMU is very good for large aircraft and has good inertial navigation performance and a wide range of operating temperature. IIM42652 (Invensense Industrial level sensor) and ICM42688P Barometers: DPS3018 *2 Compass: QMC5883L Power 4.1-6.0V DC from USB (internal circuitry and RX only) or via 2 x PowerModule connectors, or via internal BEC off VBAT input pin. All 5V pins are powered when USB, or Power Module(s), or VBAT input is used. Internal 5V, 1.5A internal BEC directly can be used with up to 6S LIPO batteries to supply board and peripheral power supply up to 1.5A max with voltage monitoring via BAT2 monitor(500ma max recommended). ADC monitoring of board voltage ADC monitoring of Servo/Output’s power rail Interfaces/Connectivity 14 PWM Outputs with independent power rail for external power source 4 Relay outputs MicroSD card slot Micro USB or remote USB via a JST_GH connector Built-in RGB LED (On three sides) Built-in AT7456E OSD FD-CAN interface *2 Two voltage & current monitoring and servo rail voltage monitoring(support to 36V) Two ADC inputs(default one for RSSI, one for Airspeed sensor, both support to 6.6V) Servo rail BEC independent power input for servos Built-in BEC (6S 1.5A) power input (share power2 module voltage monitoring) UART interface *5 Package Included: External safety Switch/Buzzer *1 External 60V/14S power module *1 I2C/CAN splitter board *1 Cables *1 32G SD Card for logging, scripts and terrain data *1 Mounting tape *1 USB-C/Standard USB cable *1 Dimensions Weight：65g Size：42mm x 65mm x 25mm

Price: 213.22 USD

Location: 深圳

End Time: 2025-01-30T06:34:10.000Z

Shipping Cost: 0 USD