Pumpking Masters Collections

Description: Pumpkin Masters Collection1 unit LID Cutter Saw & Cutting ToolUse with any conventional power drill Crafted with stainless still1 Pumpkin cutting tool 1 LID cutter sawRead and follow the manufacturer's operation and safety instruction for your power drillCarve a circular opening from the top of your pumpkins with the LID cutter saw. Steady your pumpkin on a stable surface.Firmly attach the pumpkin gutting tool to your drill. if the drill is reversible set it to forward.While securing the pumpkin insert the tool into the opening with the drill on medium to high speed, apply gentle pressure to all interior surfaces, working your way from top to bottom to loosen the seeds and strings.Periodically stop the drill and invert the pumping to discard debris. To remove string that may wrap around the shaft of the tool, turn the drill off detach the tool from the drill and slide the strings off the end of the shaft,Repeat this process to remove the inner pulp in the area you plan to carve until the pumpkin wall is about one inch thick. Caution: keep yourself and others away from moving parts do not operate without eye protection . do not operate when wearing loose clothing, long exposed hair or jewelry. Caution: this is not a toy . The components(s) contained within may be sharp. user assume all risk of injury .adult supervision required. Store all components(s) away from children. not for food use. ================ 1 unit Master collectionPower saw pumpkin carving tool1 power Saw, 1 extra blade , 1 screw driverCrafted with stainless steel.Adult use onlyCarve out BottomCare an opening from the bottom of your pumpkinClean and scrapeUsing a pumpkin masters scoop. clean out the seeds and string. Scrape the are you're about to carve until the wall feels about an inch think. Draw design on pumpkin or use a pumpkin master pattern.require 4 1.5v AA batteries not included. Attach & Transfer patternTrim the pattern and tape it to your pumpkin . Tape the folds in place. Use the screwdriver to transfer the pattern. When the design is completely transferred remove the paper pattern. Carve the design.Using the screwdriver, poke a hole in your pumpkin. Hold the saw like a pencil for best control. insert the blade tip into pumpkin flesh. Then depress the power button. Saw along the design using gentle pressure. do not force the saw thorough the pumpkin . remove an re-insert with the power off to make corners. To clean the power saw handle , wipe with damp cloth.Do not immerse handle in water! Install / change bladesRemove batteries, twist collarcounter -clockwise and pull upwards to remove from base. pull up on blade to remove. after inserting new blade replace collar and turn clockwise to tighten.Install/ replace batteries sold separately using the screwdriver, remove battery cover and dispose of old batteries property. as a simultaneous set insert new batteries noting correct polarity. replace cover and screw . do not mix old and new batteries. do not mix alkaline standards carbon zin or rechargeable batteries remove batteries when not in use. Caution: this is not a toy . The components(s) contained within may be sharp. user assume all risk of injury .adult supervision required. Store all components(s) away from children. not for food use.

Price: 19 USD

Location: Minneapolis, Minnesota

End Time: 2025-01-08T18:05:35.000Z

Shipping Cost: N/A USD