Proxel -Invisible Electromagnetic Parking Sensors Front + Rear

Description: INVISIBLE Without drilling the bumper MADE in Italy Made in Italy The warranty and quality of the Made in Italy Directly from the manufacturer Designed and manufactured in Italy. We provide reliability from 1993. Without changing the aesthetics of the car By installing the sensor inside the bumper, it does not affect the bumper line. Proxel Invisible Electromagnetic Parking Sensors Front + Rear Electromagnetic rear and front parking sensors are completely invisible and do not change the aesthetics of your car. The approach of the obstacle is always signaled with three different sounds: pre-alarm, alarm, and risk of contact. The sounds of the front version are different than the rear version. The electronic control unit for the rear version is positioned inside the luggage compartment near the rear optics group, while for the front version it is positioned inside the cockpit under the dashboard. EPS-DUAL 4.0 Details (Rear) EPS-FRONT 4.0 Details (Front) Main Features EPS-DUAL 4.0 (rear) Range 70/80 cm. up to a few inches Obstacles detected all shapes and materials Sensitivity adjustment 4 preset sensitivities Power supply connection to the reversing lamp Activation when reversing insertion Antenna sensor length 3.5 meters (can be cut from bumper length) Buzzer cable length 1.7 meters Data Cable Length 1.5 meters Compatible with CAN BUS and CHECK CONTROL No interference with other onboard equipment Antenna sensor installation internal bumper Incompatible vehicles EPS-DUAL 4.0 (rear) The following vehicles are NOT compatible with the EPS-DUAL 4.0 parking sensor: Mazda Pickup | Mitsubishi L200 | Nissan Patrol (with metal bumper) | Nissan Pathfinder (version with spare wheel on the tailgate) | Nissan Navara | Toyota Rav 4 (before 2006) | Audi A4 (2006) | Fiat Doblò (pre 2010) | Isuzu D-Max | VW T5 California | volkswagen amarok | Nissan Primastar | Jeep Cherokee (version with spare wheel on the tailgate | Jeep Wrangler | Peugeot Land Rover 2002 | Mercedes Rover Mercedes Mitsubishi Spcato Depee | Mlash Partner MLASH | Mlash 2014 | Mlash 2014 | Mitsubishi Pajero | Mitsubishi Pajero | Mitsubishi Pajero 2014 | Mlash | Mitsubishi Pajero | Mitsubishi Pajero | Mitsubishi Pajero | Mitsubishi Pajero | Mitsubishi Pajero | Mitsubishi Pajero | Mitsubishi Pajero | Mittanyback | Mitsubishi Pajero | Mercedes Rover | M Supplies for Audi A4 and Audi A6 (4f) EPS-DUAL 4.0 (rear): On some versions of Audi A4 and Audi A6 (4f) it is not possible to install the standard antenna sensor that came with the EPS-DUAL 4.0 model but a specific antenna sensor must be used (details). You can request this type of antenna sensor by indicating it in the notes before placing your order. Assembly instructions EPS-DUAL 4.0 (rear) Assembly instructions in Italian rear parking sensor mod. EPS-DUAL 4.0 Main Features EPS-FRONT 4.0 (front) Range from 60/70 cm. up to a few inches Obstacles detected all shapes and materials Sensitivity adjustment 4 preset sensitivities Power supply connection to the car battery Activation via button Antenna sensor length 3.5 meters (can be cut from bumper length) Buzzer-button cable length 1.0 meters Data Cable Length 2.5 meters Compatible with CAN BUS and CHECK CONTROL No interference with other onboard equipment Antenna sensor installation internal bumper Incompatible vehicles EPS-FRONT 4.0 (front) The following vehicles are NOT compatible with the EPS-FRONT 4.0 parking sensor: - Jeep Wrangler - BMW Z4 (2007) - Land Rover Defender - Range Rover (1999) Assembly instructions EPS-FRONT 4.0 (front) Assembly instructions in Italian front parking sensor mod. EPS-FRONT 4.0 Antenna sensor Unlike classic "button" sensors, electromagnetic parking sensors use a single sensor that is applied inside the bumper. The antenna sensor is an aluminum tape 1cm high 3.5 meters long and a few tenths thick. Once applied from one end of the bumper to the other excess can be cut off. Details Where to install the antenna sensor on your car: We suggest the antenna sensor positioning inside the bumper. If your car is not listed on the our site signal it via mail indicating model and year of registration. By purchasing this product on our site you will be entitled to: 3 year warranty Manufacturer Technical Support Italian Product More information For more information and technical specifications please visit the our site

Price: 164 AUD

Location: Torino

End Time: 2025-02-05T22:45:52.000Z

Shipping Cost: 30.16 AUD