Pro Co Sound Monoface Series Mc-2 Mic Combiner

Description: The ProCo Monoface Series MC2 Mic Combiner passively combines the signals from two low-impedance microphone (or similar sources) into a single output. It is handy for situations where the number of microphones required exceeds the number of mixer channels available, but separate equalization and level control for every microphone is not required. In a musical or recording situation, the MC2 can combine mics from sources like dual bass drums, percussion, stereo guitar amps, etc. Commercial sound uses include combining dual mics on a public speaker for redundancy and handling extra mics for audience participation at meetings. The MC2s transformer isolation minimizes interference from EMI/RFI and ground loops, retaining the advantages of common-mode noise rejection inherent in the use of balanced lines. The MC2 is fitted with standard 3-pin XLR-type connectors for INPUT 1 and 2 and OUTPUT, so hookup requires only standard microphone cables. One input is provided with a REV/POL switch to change its polarity. This is very useful for correcting acoustical or electrical phase cancellation problems such as poor mic placement. The use of the ProCo MBT-2 transformer allows the MC2 to provide a floating, low-impedance output with wide, flat frequency response, ultra-low distortion, and no ringing or overshoot to degrade transient response. The MC2s ruggedly constructed Uni-box enclosure is formed of extruded aluminum side channels and 16-gauge steel top, bottom and end plates and is designed to protect switches and connectors from accidental damage. The use of steel also provides excellent magnetic shielding for the transformer from EM/RF fields. Top-quality connectors and switches provide trouble-free service even in abusive situations such as remote broadcast and recording operations.

Price: 49.99 USD

Location: Jordan, Minnesota

End Time: 2024-11-05T08:32:54.000Z

Shipping Cost: 0 USD