Description: Prime Water Freshwater & Saltwater Aquarium Water Conditioner from Seachem 250mlPrime is the complete and concentrated conditioner for both fresh and salt water. Prime removes chlorine, chloramine and ammonia. Prime converts ammonia into a safe, non-toxic form that is readily removed by the tank's biofilter. Prime may be used during tank cycling to alleviate ammonia/nitrite toxicity. Prime detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them. Prime also promotes the production and regeneration of the natural slime coat. Prime is non-acidic and will not impact pH. Prime will not overactivate skimmers. Use at start-up and whenever adding or replacing water.DIRECTIONS: Use 1 capful (5 mL) for each 200 L (50 gallons*) of new water. For smaller doses, please note each cap thread is approx. 1 mL). (Note: The 2 & 4 L container's cap is 10 mL). This dose removes approximately 0.6 mg/L ammonia, 3 mg/L chloramine, or 4 mg/L chlorine. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is >30 C (86 F) and chlorine or ammonia levels are low, use a half dose.
Price: 16.97 USD
Location: Atwater, Ohio
End Time: 2024-03-19T14:44:44.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
MPN: 436
Test/Treatment Parameter: Chloramine, Ammonia, Salt, Nitrate, Chlorine, Nitrite
Tank Capacity: 2500 gal
Brand: Seachem
Water Type: Fresh
Type: Water Conditioner
Model: 116043601
