Power Failure, Temperature, Water, Continuity Sensors with Text Message and E...

Description: Store New Arrivals Add to Favorite View Feedback ContactPower Failure, Temperature, Water, Continuity Sensors with Text Message and Email Alerts, P3 Multi-SensorDescription Item model number POWER_MULTI_PAR1 Style P3 Country of Origin USA Package Dimensions 6.89 x 4.29 x 2.28 inches; 12 ounces Batteries 3 AAA batteries required. (included) Number of Batteries 3 AAA batteries required. (included) Battery Description battery_type_aaa Be alerted when power goes out: MySpool P3 Multi-sensor uses Wi-Fi to send text messages, email or push alerts when power goes off and comes back on. Alerts are also sent when temperature values exceed given thresholds, or water or a short is detected.Monitor outlets for outages and GFCI shut off. View temperature chart when required. All sensors can be used or disabled as needed. Customizable device description included in alert message can help to identify its location and function.Comes with an extra long 6 ft power cord and two hardened sensors: a water sensor with a 5 ft cable and a waterproof temperature sensor with a 3 ft cable. High quality moisture sensor with nickel plated surface for corrosion resistance is designed for multi use: just wipe it dry and use it again. High quality waterproof temperature sensor has a temperature range from -55°C to +125°C (-67°F to +257°F), with accuracy of 0.5°C over recommended range of -10°C to +85°C (14°F to +185°F),WiFi access during power outage is required, please check before ordering. Each MySpool P3 Multi-sensor is independent; no hub is required. Manage all from one account or create one account for each.No fees or subscription costs. Multiple phone numbers and email addresses supported. Product Description P3 Multi-sensor: enjoy all the benefits of the Power Failure Detector with 3 added sensors: a Water Detector, a Temperature sensor, and a Continuity (or Short) Detector. The added high-quality waterproof temperature sensor operates in two modes. One mode sends alerts when temperature goes above or below your thresholds. And the second mode collects and displays data so that a chart of the last 24-hour temperature measurements is available on your private page on myspool.com after you login, under MY DEVICES. You can also send this data to a ThingSpeak channel for display and analysis. See myspool.com HELP-FAQ for directions on how to setup this free data channel. Water and Temperature Alert comes with an extra long 6 ft power cord and two hardened sensors: a water sensor with a 5 ft cable and a temperature sensor with a 3 ft cable. High quality moisture sensor has a nickel plated surface for corrosion resistance. It is designed for multi use: just wipe it dry and use it again. High quality waterproof temperature sensor has a temperature range from -55°C to +125°C (-67°F to +257°F), with accuracy of 0.5°C over recommended range of -10°C to +85°C. All readings outside this range are ignored: -30°C to +105°C or -22°F to +221°F This device also comes with a 2 ft cable for the Continuity (Short) sensor. This cable can be plugged in the slot marked CONT inside the black enclosure. Short the other ends of the 2-wire cable and you will get an alert. Alternatively, this CONT slot can be used with other MySpool sensors such as the float or the door open sensor. Customization option: there is another slot marked PWR next to the CONT slot. You can cut the included cable and use the other half in the PWR slot to send a TTL level (5V) signal outside for external power ON/OFF signalling. A bright LED indicates current device status: Green for normal, Red for alarm, and Blue for communications with cloud servers. Note: Power ON and Power OFF alerts can be sent as a text message or email. Water, Temperature and Short alerts are sent only as email notifications. Be alerted when power goes out: MySpool P3 uses Wi-Fi to send text messages, email or push alerts when power goes off or comes back onName each device and send notifications to identify the power outlet affectedEach MySpool P3 is independent; no hub is requiredWiFi access during power outage is required, please check before orderingNo fees or subscription costs Currently MySpool products are supported in US and Canada only. Be alerted away from home or business MySpool P3 is a smart device that sends an alert when power failure is detected. An alert is also sent when power comes back on. That alert is a message, either via email or text, or both. P3 is configured to use your WiFi (see Important Note below). The setup takes a few minutes with a smart phone or a laptop. No Hub Required Each P3 works independently with your Wi-Fi network. Multiple devices can be placed in different locations throughout your home or business. Your notifications will include your text for each device that you specify in the device configuration. No Fees There are no fees for using MySpool P3 for any notifications. P3 purchased on MySpool.com comes with support for 1 telephone number and up to 5 email addresses for alert notifications. To add more telephone numbers without fees, see these directions. Flexible design MySpool P3 comes with an extra long 6 foot power cord connected to an enclosure with a transmitter. P3 will ignore short duration power fluctuations of less than 2 seconds so that no unnecessary notifications are sent. Note that since no device is permitted to send more than 1 alert per minute, your POWER ON notification may be delayed by up to 1 minute if power comes back on immediately. Each device requires 3 AAA batteries, included. The batteries should last 5 years or more assuming average power outages and fluctuations. Important Note: one requirement for the P3 deployment is that a WiFi network is available when A/C power outlet being monitored loses power. A good example is a UPS backed WiFi router which Power Failure Alert uses to access MySpool cloud servers. Setup Instructions for all myspool devices are available online on myspool.com. This is a summary: Connect your device to WiFi and trigger an alert: plug it in the A/C outlet being monitoredCreate an account on myspool.com and click on email link to confirm it or login to your existing account if one already existsConfirm your email subscription for this device to receive alert notifications You are done: trigger an alert from your device by unplugging it and receive an email notification! You can add a phone number and change message and other settings at any time. Device Configuration: 3 steps MySpool device setup Summary 1. Connect your device to WiFi 2. Create account on myspool.com 3. Configure your email and text message on myspool.com The first step is the most challenging one. It should also be done first so that MySpool servers can identify your device when you login to configure it. Step 1. Connect your device to WiFi Open your phone, go to Settings, and choose Wi-Fi. Under the CHOOSE A NETWORK tab you will see available networks. One of them will be the MySpool Device. It will look like SASensor-000000 where "000000" is the unique device ID. In the example it is shown as SASensor-2336877. Click on it. Once connection is established, which may take a few seconds, it will open a browser window with Alerts WiFi Manager. Step 1, continued. Configure WiFi Click Configure WiFI. You will see a list of networks that MySpool device can use. Select your WiFi router and enter its password. Click Save. Note: SAS network will not be visible on your phone after this step. You can now use your laptop or smartphone to create an account on myspool.com and specify where you want your emails and text messages sent. ABOUT US We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more.SHIPPING We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.We offer free shipping to the lower 48 states and ship within 2 business days of payment, usually sooner. We do not accept P.O. Boxes. Please provide a physical address.For shipping outside of the continental USA, we only use eBays Global Shipping Program.The item is shipped to KY and then sent to the rest of the world. International customers are responsible for all duties and taxes. Continue to check out in order to calculate costs for shipping the item to your country. Messages regarding eBays Global Shipping Program MUST be directed at eBay EXCLUSIVELY.RETURNS We offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA.PAYMENT We accept PayPal.CONTACT US This page content is yet to comePlease ad us to your favorite seller and visit again laterThank YouCUSTOMER SATISFACTION We try our very best to make sure every customer is completely satisfied. If theres a problem, message us! Were happy to help.WE ACCEPTCopyright © 2021 AutoDS. | All Rights Reserved

Price: 139.38 USD

Location: San Bernardino, California

End Time: 2025-01-12T06:00:49.000Z

Shipping Cost: 0 USD