Description: Hey guys I have a 2011-2014 MUSTANG STANDARD GT / F150 / BOSS 302 THROTTLE BODY (GEN 1) ported TB, opened up using a super spiral burr and finished in 80 followed by a light cross buff, inlet taper was opened up to a little under 86mm with the throttle blade remaining 80mm for ease of install What a ported TB will do: Removal of the dreaded off-idle flat spot (very noticeable in manual trans cars and still present in automatics as well) Much more throttle response at every throttle position but notably better in the lower throttle where you spend most of your time driving and say when you're doing a dig or 60 roll, especially in manual transmission cars The throttle is much more linear now and more intuitive.....tip in throttle as you roll into it is also much sharper with this mod which as mentioned helps with roll racing This TB is designed to be a plug and play option for someone looking for a bolt on mod, designed to work on the stock tune, as with every ported TB I recommend a TPS relearn upon start up to calibrate the TPS... Should you be looking to get tuned or are currently tuned, I've had customers get tuned via VMP and Lund with great success. This TB would be awesome for someone with a Gen 1 coyote with a centrifugal or turbo setup, who is looking to get a bit more pep
Price: 250 USD
Location: Columbia, Missouri
End Time: 2024-12-07T04:12:42.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Brand: AKMspeed
Type: Throttle Body
