Polyurethane Seam Sealer Automotive Compound Kit

Description: Superior Seal for Unparalleled Performance For a quick fix with lasting hold, turn to this automotive sealant to get the job done right. Properly patching voids demands durability. Set it and forget it with a body sealer that is non-shrinking, non-cracking, and low-odor. Incredibly versatile, this auto body seal compound can be used on any bare, primed, or painted surface. This auto sealant can fill all interior or exterior seams and joints. From wheel wells to door panels, from floor pans to drip rails and more. This adhesive does it all. Power through your project with this automotive body panel adhesive kit. Directions: Primer or Painted Surface - Clean with a -compliant cleaner and scuff using an abrasive pad - Re-clean to remove debris before applying the seam sealer auto body compound - Pierce the seal, install the nozzle, then remove the metal seal - Insert the poly urethane adhesive sealant into a caulking and trim the nozzle - Apply the seam binding compound and tool it to achieve the desired finish - Allow 45 minutes for . For best results, wait 24 hours and scuff prior to painting Weld Through - Strip coatings around the weld flanges - Apply the auto body seam sealer and brush to cover all bare metal - Align and use a shunt clamp to hold before starting to weld Bare Metal - Clean with a -compliant cleaner and grind or scuff weld nuggets or locations - Re-clean to remove debris before applying the automotive panel bond adhesive compound - Pierce the seal, install the nozzle, then remove the metal seal and trim the nozzle - Apply the paintable seam sealer and tool it to achieve the desired finish - Allow 45 minutes for . For best results, wait 24 hours and scuff prior to painting Additional Instructions: Seam seal compound requires an ambient temperature of Plug Any Void –– Easily patch large cracks with confidence when using this thick auto seam sealer. This single-component panel bond compound provides superior adhesion on bare, primed, or painted metal surfaces on your vehicle or RV Complete Kit –– Comes with nitrile gloves and an application tip to make the process seamless This joint and seam filler set comes with everything you need and more. The sealant is with any standard caulking Permanently Fill Gaps –– Don't settle for a body panel adhesive sealant that doesn't hold up. Trust in a non-shrinking, non-cracking and low odor formula that stays remarkably flexible over time. Prevent leaks and debris from infiltrating your vehicle, and promote corrosion resistance Primer and Paint Ready –– Get your project ready for the road in just 24 hours. Smooth out and let the quick-seam sealant settle in for 45 minutes. Then you're ready to and paint the automotive body filler for a flawless finish that blends right in All-Weather Performance –– High heat and humidity are no match for this car sealant. Enhanced moisture properties ensure a durable hold for interior or exterior use. Use a urethane sealer that is worlds ahead of any solvent-based solutions

Price: 22.32 USD

Location: Wahoo, Nebraska

End Time: 2024-10-27T08:42:02.000Z

Shipping Cost: 0 USD