PENTAX K-3 Mark III Main Body Digital Single Lens Reflex Camera APS-C Silver

Description: Description【Condition】NewOptical viewfinder with a field of view of approximately 100% and a viewfinder magnification of approximately 1.05xThe camera is equipped with an optical viewfinder with a field of view of approximately 100% and a magnification of approximately 1.05x [FA F1.4/50mm/∞]. The newly developed glass pentaprism with a high refractive index provides a large field of view comparable to that of a full-size camera while maintaining eye relief, and the distortion-corrected lens and optimized coating provide a clear and natural viewfinder image without distortion, with a brightness of The brightness is approximately 10% brighter than that of the PENTAX K-3 II. The focusing screen is made of Natural Bright Matte III, which is renowned for its ease of focusing during manual focusing, and provides a high quality view with excellent reproducibility of bokeh effect. In addition, the transparent viewfinder display makes it possible to display a variety of shooting information on the screen. High-resolution images with approximately 25.73 effective megapixels and ultra-high sensitivity performance with a maximum ISO sensitivity of 1.6 millionIn pursuit of even higher image quality, a new back-illuminated CMOS image sensor with low-pass filter-less specifications has been adopted to produce high-resolution images of approximately 25.73 effective megapixels, equivalent to APS-C size. In addition, the newly developed high-performance image processing engine "PRIME V" and "Accelerator Unit II" have been incorporated in a renewed basic device to achieve high image quality images with thoroughly reduced noise while maintaining high resolution throughout the entire range from low sensitivity to ultra-high sensitivity. The new camera also dramatically improves high-sensitivity noise reduction processing performance to achieve a maximum ISO sensitivity of 1.6 million at ultra-high sensitivity, which significantly expands the range of possible shooting. 5-axis, 5.5-step SR II image stabilization system1. In-body image stabilization available with all attachable lensesNote 1The SR II (Shake Reduction II) mechanism built into the camera body effectively corrects camera shake even in shooting conditions that are prone to camera shake, such as telephoto shooting, shooting with the flash off, and shooting landscapes at dusk. In addition to general angular shake (two axes, horizontal and vertical), the camera also corrects for shift shake (two axes, horizontal and vertical) and rotational shake, which tend to occur during macro shooting. The correction effect is our highest at 5.5 stops (based on CIPA standards; lens used: HD PENTAX-DA 16-85mmF3.5-5.6ED DC WR, f=85mm), which significantly expands the limits of hand-held photography. It is also equipped with a new "stream mode" for shooting slow-moving subjects. 2. "Real Resolution System" super resolution technologyThe camera is equipped with the "Real Resolution System," a super-resolution technology that combines four images taken by shifting the image sensor unit by one pixel at a time to create a single image. This enables the acquisition of RGB color information for each pixel, compared to the conventional Bayer system, which can only acquire one color information per pixel, resulting in ultra-high definition images with excellent detail and color reproduction and true resolving power. In addition, the camera is equipped with an on/off function for motion compensationNote 2 that detects only the areas where motion is detected during continuous shooting to reduce the effect of image composition, thereby expanding the range of possible use scenarios. 3. "Low-pass selector" to eliminate false colors and moiréNote 2The "low-pass selector" function allows the image sensor unit to be moved in sub-pixel increments during exposure, producing a moiré reduction effect similar to that of an optical low-pass filter. Compared to optical low-pass filters, which have a fixed effect, the "low-pass selector" function allows the user to turn the effect on and off and select the strength of the effect, making it easy to optimize shooting settings according to the subject and shooting conditions. Note 1: Lenses that can be mounted are K, KA, KAF, KAF2, KAF3, KAF4 mount lenses, screw mount lenses with an adapter, and lenses for 645 and 67. Some functions may not be available depending on the lens. Note 2: This function is more effective at shutter speeds lower than 1/1000. This function cannot be used in combination with certain shooting modes such as the Real Resolution System. High-resolution LCD monitor for intuitive touch operationThe 3.2-inch high-resolution LCD monitor with approximately 1.62 million dots is the first in the K series to support touch panel operation, allowing users to quickly and intuitively make various menu settings and enlarge or advance images during playback. The gap between the LCD monitor, LCD panel, and tempered glass protective cover is filled with a special resin to suppress diffuse reflection of light and improve visibility. In addition, the large gap between the LCD monitor and viewfinder viewport has been designed to prevent the user's nose from hitting the viewfinder when looking through it, and an eye sensor mounted below the viewfinder turns off the image monitor as soon as the user looks through the viewfinder, making it easier to concentrate on shooting. The eye sensor mounted below the viewfinder turns off the image monitor as soon as the user looks through the viewfinder, making it easier for the user to concentrate on shooting. 101-point AF system "SAFOX 13The newly developed phase detection AF system "SAFOX 13" enables high-precision AF, with 25 cross sensors in the center of the 101 AF points, and the low-light limit of the AF system is -4 EVNote 3. In addition, the new RGBIr metering sensor, whose pixel count has been increased to approximately 307,000, and the latest motion prediction algorithms improve AF tracking performance and the ability to respond to changes in subject speed and irregular motion. During operation, a new distance-measuring lever enables more intuitive specification of distance-measuring points (up to 41 points). Note 3: -4EV is only available when an F2.8 luminous flux-compatible lens is mounted, and only for F2.8 luminous flux-compatible distance measurement points. PENTAX Real-Time Scene Analysis System, which applies artificial intelligence technologyThe combination of the new high-resolution RGBIr metering sensor and the latest PRIME V image processing engine enables the PENTAX Real-time Scene Analysis System, which uses image recognition technology to detect subjects such as a person's face and eyes and analyze their movements in real time during viewfinder shooting, for optimal exposure control and subject capture during auto focus. This enables optimal exposure control and subject capture during autofocusing.By employing deep learning, which is gaining attention as an artificial intelligence technology, in the algorithm, more stable subject detection and scene discriminationNote 4 are achieved. Note 4: Effective when AUTO (Scene Analyze Auto) or Custom Image (Auto Select) is selected as the exposure mode. High-speed continuous shooting up to approx. 12 frames/secondThe newly developed mirror drive system enables high-speed, high-precision control of the mirror and shutter unit, and the PRIME V high-speed data transfer system enables high-speed continuous shooting at a maximum of approximately 12 frames per second in AF. Shooting functions that enhance shooting efficiency and comfortUnique Hyper-Program operation system with a new "ADVANCED" mode for more flexible exposure settings. A key lock function prevents malfunctions of exposure control buttons and the cross key. New "Smart Function" button allows you to quickly select and set various functions without switching to the menu screen. The "Button Customize" function allows you to change the function assignments of 10 buttons to your own preference. Compact and rugged body with dustproof and drip-proof constructionLightweight and robust magnesium alloy is used for the body's front, back, top and bottom exteriors. The body is dustproof and drip-proof with seals on all parts, and has cold resistance that guarantees operation down to -10°C (-40°F), making it durable and reliable in rainy, dusty, and cold environments. The camera is also equipped with a shutter unit that has passed a durability test of 300,000 times (with the camera mounted) to ensure a robust body that can be used in any shooting situation. 4K movie recording function with a variety of settingsThe camera can shoot 3840 x 2160 (30p/24p) 4K video using H.264 recording format and 1920 x 1080 (60p/30p/24p) full HD video. A stereo microphone jack and headphone jack for external input are also provided, allowing manual setting of audio recording levels and monitoring of microphone input sound pressure, as well as a wind-noise reduction function. The touch panel operation on the rear LCD monitor allows users to set shooting functions and exposure compensation while taking operation noise into consideration. Dual communication with Bluetooth & wireless LANThe camera is equipped with a wireless function that can be used in conjunction with mobile devices such as smartphones and tablets. The dedicated "Image Sync" application allows users to view the live-view display, take pictures, and make various settings from their smartphones. While the camera and the application are connected, location information acquired by the smartphone can be recorded in the captured image. Other Features1. "DRII (Dust Removal II)" boasts top-class dust removal performance through ultrasonic vibration. 2. USB Type-C compatible for charging the camera body. 3. "Outdoor Monitor" and "Red Screen Display" functions for quick brightness adjustment to suit the operating environment 4. "HDR" shooting function that supports RAW saving and hand-held shooting Dual SD card slots (slot 1 is UHS-II compatible) 6. Ergo-design for the exterior shape and operating components to fit various hand sizes and finger lengths 7. Supports aperture-priority AE shooting and Exif recording of focal length when using old lenses without electronic contacts. The latest version of the utility software "Digital Camera Utility 5" is included. D-BG8 Battery Grip] The D-BG8 battery grip is dustproof and drip-proof, and is exclusively designed for use with the PENTAX K-3 Mark III. It is equipped with shutter release, Smart Function, distance measurement lever, AF/AE lock, exposure compensation, and green dials as well as the camera's main body, making it easy to shoot in the vertical position. The camera can be powered by the same high-capacity rechargeable lithium-ion battery (D-LI90P) that powers the PENTAX K-3 Mark III. The battery can be recharged using the camera's USB port while it is attached to the camera.Manufacturer's suggested retail price: 42,000 yen (excluding tax)Date of release: Simultaneous release with the "PENTAX K-3 Mark III [Hot shoe cover "O-HC177"]A high-grade stainless steel hot shoe cover that dresses up the camera body. The shape is designed to blend in with the design of the penta section.Manufacturer's suggested retail price: 4,500 yen (excluding tax)Release date: Simultaneous release with the "PENTAX K-3 Mark III External dimensionsApprox. 134.5 mm (W) x 103.5 mm (H) x 73.5 mm (D) (excluding projections)WeightApprox. 820g (including battery and SD card)Approx. 735g (main unit only) Included in the boxStrap O-ST162, ME finder cap, rechargeable lithium-ion battery D-LI90P, USB power adapter, power plug, USB cable I-USB166(After this, the camera is shipped with the following items attached) Eyecup FU, Hot shoe cover FK, Syncro socket 2P cap, Body mount cap KII, Battery grip contact point cover Shipping information: 【Shipping cost】Standard shipping(FedEX or Japan Post) 【Estimate Time of Arrival】The package will arrive 7-30 days after shipment 【Handling Time】 1-10days. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.If the cancellation is due to buyers, we will charge a Payonner fee. If there is a remote charge for your address, we will charge you for additional shipping. Than you for your understanding.

Price: 1437.8 USD

Location: Shizuoka

End Time: 2024-10-27T23:18:03.000Z

Shipping Cost: 0 USD