PAC RP4.2-TY13 TOYOTA Interface 2018-up, select models

Description: Product highlightsretains steering wheel controls (pre-programmed) retains factory amplifier with Real Time Fade retains factory reverse camera (if equipped) provides outputs (parking brake, reverse, vehicle speed sense [V.S.S.]) for navigation and video receivers does not retain rear seat entertainment system (RSE) warranty: 1 year What's in the boxRadio replacement interface module Interface harness Vehicle harness Video converter Installation Instructions Video Converter Instructions About this itemWritten by Crutchfield's Bob BihlmayerGet better sound in your late-model Toyota PAC's RP4.2-TY13 wiring interface lets you install an aftermarket receiver in select 2018-up Toyota vehicles. The interface works with non-amplified and amplified factory audio systems. You'll retain your factory steering wheel control functions and you'll also keep your factory amplifier and backup camera (if your new stereo has a composite video camera input and monitor). The interface also supplies the outputs (parking brake, reverse, vehicle speed sense [V.S.S.]) required to install a navigation or video receiver and retains the built-in USB port (adapter required). Note: Adjustment of the vehicle settings through the original radio's vehicle settings menu will be disabled after installation of the new radio. Configure all settings as desired before removing the factory radio.

Price: 134.99 USD

Location: Charlottesville, Virginia

End Time: 2024-08-26T13:56:59.000Z

Shipping Cost: 0 USD