Description: OutBack Power Flexmax 80 FM80 MPPT Solar Charge Controller UNED IN SERVICE WORKING WHEN TURNED OFFUSED ABOUT 5 YEARS WITH NO ISSUES - IN VERY GOOD CONDITION - I BOUGHT NEW & INSTALLED MYSELFSIZE: L 19.8 X w 9.8 X H 9.7in. - WEIGHT: 15 LBS. BUY ONE ITEM AT THE REGULAR PRICE THE 2ND ITEM IS (FROM OUR STORE) 10% OFF, BUY A 3RD ITEM IT IS 15% OFF THAT PRICE, BUY 4th item (HERE OR FROM OUR STORE) you will receive 20% off - MUST BE PURCHASED THE SAME DAY JUST MESSAGE ME AFTER YOU HAVE BOUGHT THE ITEMS BEFORE YOU PAY AND I WILL SEND A NEW INVOICE WITH THE DISCOUNTS (EBAY MAY DO THIS AUTOMATICALY, BUT JUUST IN CASE WE WANT YOU TO GET THE DISCOUNTS). THANKS FOR LOOKING! Efficiently managing photovoltaic power systems and providing improved output results, the Outback Flexmax 80 Amp Solar Charge Controller uses Maximum Power Point Tracking (MPPT) technology for charge optimization. With negative or positive ground systems, the Flexmax handles up to 80 Amps of current even on very hot days of up to 104F. This high performance charge controller includes data logging and network-based configuration and control. Outback Flexmax 80 FM80 MPPT 80 AMP Solar Charge ControllerOutback Power SystemsFLEXmax 80 MPPT Charge Controller The FLEXmax 80 is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Systems. The FLEXmax 80’s innovative MPPT algorithm is both continuous and active, increasing your renewable energy yield up to 30%. Thanks to enhanced cooling, the FLEXmax 80 can operate at its full 80 amp maximum current rating in ambient temperatures as high as 104°F (40°C). Included in the FLEXmax 80 are all of the features first developed by OutBack Power in the revolutionary MX60, such as support for a wide range of nominal battery voltages and the ability to step-down a high voltage solar array to recharge a low voltage battery. A built-in backlit display shows status information at the touch of a button. Enhanced network communications allow the FLEXmax 80 to be remotely programmed via the optional MATE system display and controller. The new FLEXmax 80 is the only choice when you demand a high performance, efficient and customizable charge controller for your advanced power system. Features:Increases PV Array Output by up to 30%Advanced Continuous Maximum Power Point Tracking AlgorithmFull Output Capacity in Ambient Temperatures up to 104°F (40°C)Battery Voltages from 12 VDC to 60 VDCAutomatic Battery Voltage Detection at Start UpFully OutBack Network Integrated and ProgrammableProgrammable Auxiliary Control OutputNegative or Positive Ground System CapableBuilt-in 128 days of Data Logging FLEXmax™ 80 Specifications*Nominal Battery Voltages12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)Maximum Output Current80 amps @ 104° F (40°C) with adjustable current limitMaximum Solar Array STC Nameplate12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts / 48 VDC systems 5000 Watts / 60 VDC Systems 7500 WattsNEC Recommended Solar Array STC Nameplate12 VDC systems 1000 Watts / 24 VDC systems 2000 Watts / 48 VDC systems 4000 Watts / 60 VDC Systems 5000 WattsPV Open Circuit Voltage (VOC)150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximumStandby Power ConsumptionLess than 1 Watt typicalPower Conversion Efficiency97.5% @ 80 Amps in a 48 VDC System - TypicalCharging RegulationFive Stages: Bulk, Absorption, Float, Silent and EqualizationVoltage Regulation Set points10 to 80 VDC user adjustable with password protectionEqualization ChargingProgrammable Voltage Setpoint and Duration - Automatic Termination when completedBattery Temperature CompensationAutomatic with optional RTS installed / 5.0 mV per °C per 2V battery cellVoltage Step-Down CapabilityCan charge a lower voltage battery from a higher voltage PV array - Max 150 VDC inputProgrammable Auxilary Control Output12 VDC output signal which can be programmed for different control applications (Maximum of 0.2 amps DC)Status Display3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters totalRemote Display and ControllerOptional Mate or Mate2 with RS232 Serial Communications PortNetwork CabelingProprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)Data LoggingLast 128 days of Operation - Amp Hours, Watt Hours, Time in Float , Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of productionHydro Turbine ApplicationsConsult factory for approved TurbinesPositive Ground ApplicationsRequires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications)Operating Temperature RangeMinimum -40° to maximum 60° C (Power capacity of the controller is automatically derated when operated above 40° C)Environmental RatingIndoor Type 1Physical SpecificationsConduit KnockoutsOne 1" (35mm)on the back; One1" (35mm) on the left side; Two 1" (35mm) on the bottomWarrantyStandard 5 yearWeight- Unit, 12.20 lbs (5.56 kg) - Shipping, 15.75 lbs (7.10 kg)Dimensions- Unit 16.25" x 5.75" x 4" (41.3 x 14 x 10 cm) - (H x W x D) - Shipping 21" x 10.5" x 9.75" (53 x 27 x 25 cm)OptionsRemote Temperature Sensor (RTS), HUB 4, HUB 10, MATE, MATE 2Menu LanguagesEnglish & Spanish OutBack Power provides a five (5) year limited warranty against defects in materials and workmanship, and a two (2) year limited warranty against fan failure Use appropriate wire size in accordance with NEC.
Price: 328 USD
Location: Grayson, Kentucky
End Time: 2024-11-03T11:51:11.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Current Output: 80-89 A
System Configuration: OFF-GRID or GRID-TIE
Power Source: Solar
Size: - Unit 16.25" x 5.75" x 4" (41.3 x 14 x 10 cm) - (H x W x D)
Custom Bundle: No
Wattage: 80-99 W
MPN: FM80150VDC, FM80
Wire Gauge: 8 AWG
Current Type: DC
Unit Type: lb
Voltage: 48V
Features: LCD Display
Unit Quantity: 2
Protection Properties: Discharge Protection, Freeze Protection, Lightning Protection, Low Voltage Protection, Overcharge Protection, Overcurrent Protection, Overload Protection, Overvoltage Protection, Short Circuit Protection, Surge Protection, Thermal Protection
Non-Domestic Product: No
Maximum Input Power: 201-300 W
Maximum Input Voltage: 41-50 V
Inverter Technology: Battery-Based
Color: Black
Current Rating: 201-250 A
Material: STEEL
Modified Item: No
Brand: OutBack Power
Type: Charger/Inverter
Connector Configuration: FM
Model: FM80
Recommended Environment: Charge Controller
Charging Mode: MPPT (Maximum Power Point Tracking)
Country/Region of Manufacture: United States
Resistance Properties: Abrasion Resistant, Acid Resistant, Corrosion Resistant, Dustproof, Dust Resistant, Fade Resistant, Fingerprint Resistant, Grease Resistant, Heat Resistant, Moisture Resistant, Mold Resistant, Rustproof, Rust Resistant
Application: Home/Garden
Power: 201-300 W
Product Line: OutBack Flexmax
